Abstract:A high-sensitivity and miniature open cavity Fabry–Perot interferometer (OCFPI) encapsulated with the polydimethylsiloxane (PDMS) film based on the high-order harmonic Vernier effect is designed and experimentally investigated. To the best of our knowledge, PDMS is applied for the first time to fill the OCFPI to obtain high-temperature sensitivity. The resonant dip (peak) wavelength of the designed temperature sensor monotonically moves toward the shortwave direction as the temperature increases from 40 °C to $60~^{\circ }\text{C}$ due to the effects of expansion and thermo-optic property of PDMS. The proposed OCFPI encapsulated with PDMS film provides the following excellent performance advantages: 1) compared with traditional all-fiber air-cavity OCFPIs with the temperature sensitivity of approximately 10 pm/°C, the proposed OCFPI sensor has a much higher temperature sensitivity of −3.4 nm/°C at the temperature range of $40~^{\circ }\text{C}$ – $60~^{\circ }\text{C}$ with a magnification factor ( ${M}$ -factor) of approximately 11 when the order of harmonic Vernier effect ${i} =4$ ; 2) the proposed OCFPI exhibits good reversibility during the heating and cooling processes, and the measured ${M}$ -factor matches well with the theoretically calculated ${M}$ -factor; 3) the proposed OCFPI shows excellent stability with maximum wavelength deviation of 0.567 nm (internal envelope based on a fourth-order harmonic Vernier effect) and 0.042 nm (upper envelope) within 450 min; and 4) the proposed OCFPI is inexpensive, robust, easy to fabricate, and compact, which can be used in harsh environments. Therefore, it provides excellent potential in dynamic temperature measurement.

High-sensitivity and Fast-Response Fiber-Optic Micro-Thermometer Based on a Plano-Concave Fabry-Pérot Cavity Filled with PDMS

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

High-Sensitive and Spectrum-Contrast-enhanced Temperature Sensing by using a Bullet-Shaped Fiber Cavity filled with PDMS

Optical Fiber Temperature Sensor Based on PDMS-Filled Air-Cavity Fabry–Perot Structure

High-temperature-sensitive and Spectrum-Contrast-enhanced Sensor Using a Bullet-Shaped Fiber Cavity Filled with PDMS

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Ultracompact Fiber Sensor Tip Based on Liquid Polymer-Filled Fabry-Perot Cavity with High Temperature Sensitivity

Compact Optical Fiber Temperature Sensor with High Sensitivity Based on Liquid-Filled Silica Capillary Tube

Compact Fiber Biocompatible Temperature Sensor Based on a Hermetically-Sealed Liquid-Filling Structure

Optical Fiber Fabry–Pérot Microfluidic Sensor Based on Capillary Fiber and Side Illumination Method

High-sensitivity and Fast-Response Fiber Optic Temperature Sensor Using an Anti-Resonant Reflecting Optical Waveguide Mechanism

Ultrahigh Sensitivity Temperature Sensor Based on Harmonic Vernier Effect

High-Sensitivity Temperature Sensor Based on Fiber Fabry-Pérot Interferometer with UV Glue-Filled Hollow Capillary Fiber

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

Highly Sensitive OPD-demodulated Fiber Temperature Sensor Based on an Ultra-Long Liquid-Core with a Syringe Shape.

High sensitivity optical fiber temperature sensor based on PDMS-filled with extended measuring range

A High-Sensitivity Temperature Sensor Based on a Liquid Cladding Tapered Microfiber

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application