Abstract:A high-sensitivity and miniature open cavity Fabry–Perot interferometer (OCFPI) encapsulated with the polydimethylsiloxane (PDMS) film based on the high-order harmonic Vernier effect is designed and experimentally investigated. To the best of our knowledge, PDMS is applied for the first time to fill the OCFPI to obtain high-temperature sensitivity. The resonant dip (peak) wavelength of the designed temperature sensor monotonically moves toward the shortwave direction as the temperature increases from 40 °C to $60~^{\circ }\text{C}$ due to the effects of expansion and thermo-optic property of PDMS. The proposed OCFPI encapsulated with PDMS film provides the following excellent performance advantages: 1) compared with traditional all-fiber air-cavity OCFPIs with the temperature sensitivity of approximately 10 pm/°C, the proposed OCFPI sensor has a much higher temperature sensitivity of −3.4 nm/°C at the temperature range of $40~^{\circ }\text{C}$ – $60~^{\circ }\text{C}$ with a magnification factor ( ${M}$ -factor) of approximately 11 when the order of harmonic Vernier effect ${i} =4$ ; 2) the proposed OCFPI exhibits good reversibility during the heating and cooling processes, and the measured ${M}$ -factor matches well with the theoretically calculated ${M}$ -factor; 3) the proposed OCFPI shows excellent stability with maximum wavelength deviation of 0.567 nm (internal envelope based on a fourth-order harmonic Vernier effect) and 0.042 nm (upper envelope) within 450 min; and 4) the proposed OCFPI is inexpensive, robust, easy to fabricate, and compact, which can be used in harsh environments. Therefore, it provides excellent potential in dynamic temperature measurement.

Ultrasensitive Temperature Fiber Optic Sensor Based on a HO(Me2SiO)nH (silicone Rubber) Fabry–Pérot Cavity

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

High-Sensitive and Spectrum-Contrast-enhanced Temperature Sensing by using a Bullet-Shaped Fiber Cavity filled with PDMS

Optical Fiber Fabry–Pérot Microfluidic Sensor Based on Capillary Fiber and Side Illumination Method

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

Optical Fiber Temperature Sensor Based on PDMS-Filled Air-Cavity Fabry–Perot Structure

Compact Optical Fiber Temperature Sensor with High Sensitivity Based on Liquid-Filled Silica Capillary Tube

Compact Fiber Biocompatible Temperature Sensor Based on a Hermetically-Sealed Liquid-Filling Structure

In-fiber Fabry-Perot temperature sensor using silicone-oil-filled the quartz capillary tube

Fiber-optic Temperature Sensor Using Dual Fabry-Perot Cavities Filled with Gas of Different Pressure

Highly Sensitive Optical Fiber Temperature Sensor Based on the Thermal Shift of the Liquid–air Interface

Ultrahigh Sensitivity Temperature Sensor Based on Harmonic Vernier Effect

Simple Fiber-Optic Sensor for Simultaneous and Sensitive Measurement of High Pressure and High Temperature Based on the Silica Capillary Tube

High-temperature-sensitive and Spectrum-Contrast-enhanced Sensor Using a Bullet-Shaped Fiber Cavity Filled with PDMS

High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

Compact Optical Fiber Sensor Based on Silica Capillary Tube for Simultaneous High Temperature and Transverse Load Measurement

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

Ultracompact Fiber Sensor Tip Based on Liquid Polymer-Filled Fabry-Perot Cavity with High Temperature Sensitivity