Abstract:Calculating disc cutter wear and predicting wear life are long-standing issues affecting the efficiency and cost of tunnel boring machines (TBMs). During the TBM excavation process, the wear of the disc cutter is a comprehensive outcome of the interaction between the tool and rock. Studying the mechanisms of tool rock breaking and wear can assist in developing a more precise model for predicting cutter wear. Therefore, based on the rock-breaking and wear mechanisms of a cutter, this study developed a model for predicting the cutter wear rate and life. The model is based on the theory of dense core–cavity expansion combined with the motion state of a cutter. First, the TBM excavation process and rock-breaking mechanism of a cutter were analyzed in detail. A cutting force model under the compression shear failure mode based on the dense core–cavity expansion theory was established. Based on the force model, a prediction model for the wear rate and life of the disc cutter was established, considering the working characteristics and wear mechanism. Furthermore, the impact of penetration on the prediction model was investigated. In addition, to demonstrate the practicality of the method, this study conducted a comprehensive examination using engineering examples. The results showed that the average difference in the cutter average wear rate using the developed model was less than 3% compared with the actual engineering result. In addition, the average difference in the wear life rate was less than 5%. Finally, the developed prediction method was compared with other models. The wear rate fitting accuracy was improved by 4.91–10.85% and the wear life fitting accuracy was improved by 5.11–12.19% by the developed method. This improvement confirms the reasonableness and reliability of the method. This method can estimate the wear rate and lifespan of a cutter more accurately and reliably than other methods, providing a practical tool to TBM engineers to make informed decisions and optimize tool replacement programs.

Prediction of Lateral Continuous Wear of Cutter Ring in Soft Ground with Quartz Sand

The energy method to predict disc cutter wear extent for hard rock TBMs

A new prediction model for disc cutter wear based on Cerchar Abrasivity Index

Development of a Real-Time Monitoring and Calculation Method for TBM Disc-Cutter's Cutting Force in Complex Ground

Fragmentation Energy-Saving Theory of Full Face Rock Tunnel Boring Machine Disc Cutters

Development of a Prediction Model for the Wear Evolution of Disc Cutters on Rock TBM Cutterhead

Study on Wear Prediction of Shield Disc Cutter in Hard Rock and Its Application

Prediction model for disc cutter wear during hard rock breaking based on plastic removal abrasiveness mechanism

Prediction Model of TBM Disc Cutter Wear During Tunnelling in Heterogeneous Ground

Sediment-wear morphology prediction method of hydraulic machine based on differential-quadrature method

Prediction model of wear rate of inner disc cutter of engineering in Yinsong, Jilin

Enhanced Wear Prediction of Tunnel Boring Machine Disc Cutters for Accurate Remaining Useful Life Estimation Using a Hybrid Model

Force and wear prediction model of disc cutter under compression shear failure mode based on dense core–cavity expansion theory (U-713)

Numerical Prediction of Wear in SAG Mills Based on DEM Simulations

Analytical Research on the Wear Mechanism of TBM Disc Cutters Based on an Energy Approach

Prediction of disc cutter failure in shield tunnelling in mixed-face ground condition

Prediction Model for the Teeth Hob Cutter of Tunnel Boring Machines in High-content Quartzite Strata

Prediction of TBM Cutter Wear in Heterogeneous Ground under High Ambient Pressure

Prediction Model for TBM Disc Cutter Wear in Mixed-face Ground Condition

Interaction between partial-worn TBM cutters and rocks: experimental and numerical investigation

A Wear Rule and Cutter Life Prediction Model of a 20-in. TBM Cutter for Granite: A Case Study of a Water Conveyance Tunnel in China