Abstract:The low temperature sintering properties, structure and dielectric response behavior and AC impedance spectroscopy of Ba0.95Ca0.05Zr0.3Ti0.7O3+x wt.% Li2CO3 (x = 0 and x = 1.0) ceramic specimens were investigated. On this basis, the polarization (P) vs. electric field (E) relation characteristics and energy storage performance of the ceramic specimens were studied. The addition of Li2CO3 reduced the sintering densification temperature by 200 °C for the ceramic with x = 1.0, resulting in a relative density of 96.2 % after sintering at 1080 °C. Li+ incorporated into the B-site of the cubic perovskite-type and resulted in the formation of oxygen vacancy, which promoted the sintering densification process of ceramic samples with x = 1.0. The addition of lithium did not have remarkable adversely affecting on the basic dielectric properties, as the ceramic specimen with x = 1.0 sintered at 1080 °C exhibited a dielectric constant of 1950 and a loss of 0.4 % at 10 kHz. Additionally, the addition of lithium enhanced the energy storage performance of the specimens, with the maximum attainable electric field increasing by 50 % for the ceramic with x = 1.0 compared to the value for the ceramic with x = 0. The ceramic with x = 1.0 exhibited an energy storage density (ESD) of 1.0 J/cm3 and an efficiency of ∼80.0 % under 240 kV/cm, which was superior to the ceramic with x = 0. The enhanced energy storage performance of the ceramic with x = 1.0 (increased by ∼70 %) was tentatively explained with a strong restriction effect of the defect dipoles in the specimen to the electric field-driven motion of the oxygen vacancies in the specimen. Overall, these findings suggest that the addition of Li2CO3 could significantly improve the sintering and energy storage performance of BT-based dielectric ceramics, while did not result in remarkable negative impact on dielectric properties.

Improved Dielectric Strength and Energy Storage Density in Ba6−3xLa8+2xTi18O54 (x = 0.5, 2/3, and 0.75) Ceramics

High Dielectric Strength and Energy Storage Density in Ba6−3xLn8+2xTi18O54 (ln = La, Sm) Low-Loss Dielectric Ceramics

Improved Energy Storage Performance of Ba0.4Sr0.6TiO3 Nanocrystalline Ceramics Prepared by Using Oxalate Co-Precipitation and Spark Plasma Sintering

Enhanced Dielectric Strength and Energy Storage Density in BaTi 0.7 Zr 0.3 O 3 Ceramics Via Spark Plasma Sintering

Defect Dipoles Induced High‐energy Storage Density in Mn‐doped BST Ceramics Prepared by Spark Plasma Sintering

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Enhancing Pulse Energy‐storage Properties of BaTiO3‐based Ceramics Using Novel Glass Additive

Large energy storage properties of lead-free (1-x)(0.72Bi0.5Na0.5TiO3-0.28SrTiO3)-xBiAlO3 ceramics at broad temperature range

Improved Energy Storage Density performance of the (1-x) [0.88BaTiO3–0.12Bi(Li0.5Nb0.5)O3]-x(0.8BaTiO3–0.2SrTiO3) Lead-Free Ceramics

Enhanced Energy Storage Properties of Barium Strontium Titanate Ceramics Prepared by Sol-Gel Method and Spark Plasma Sintering

Dielectric and energy storage properties of the (1-x)BaTiO3-xBi(Li1/3Hf2/3)O3 (0.08 ≤ × ≤ 0.14) ceramics

Enhanced Energy Storage Density and Its Variation Tendency in CaZrxTi1−xO3 Ceramics

Enhanced energy storage performance in Sr0.7La0.2Zr0.15Ti0.85O3-modified Bi0.5Na0.5TiO3 ceramics via constructing local phase coexistence

Improved energy storage performance of Ba0.4Sr0.6TiO3 by doping high polarization BiFeO3

Influence of Sintering Temperature on Energy Storage Properties of BaTiO3–(Sr1−1.5Bi ) TiO3 Ceramics

Energy Storage Property of (Pb0.97la0.02)(zr0.5sn0.4ti0.1)o3-(Na0.5bi0.5)0.94ba0.06tio3 Ceramics: Effects of Antiferroelectric-Relaxor Transition and Improved Breakdown Strength

Structure, dielectric response behavior and AC impedance spectroscopy of Ba0.95Ca0.05Zr0.3Ti0.7O3 ceramics with Li2CO3 addition for enhanced energy storage performance

Improved energy storage performance of lead-free BaTi0.96Li0.04O2.94 ceramics via domain structure engineering

CaTiO3 Linear Dielectric Ceramics with Greatly Enhanced Dielectric Strength and Energy Storage Density

Dielectric and energy storage properties of (Ba0.2Sr0.2Na0.2Ca0.2La0.2)(ZrxTi1‐x)O3 high‐entropy ceramics and thin films

High Energy Storage Density and Efficiency with Excellent Temperature and Frequency Stabilities under Low Operating Field Achieved in Ag0.91Sm0.03NbO3-modified Na0.5Bi0.5TiO3-BaTiO3ceramic S