Abstract:The high energy penalty of absorbent regeneration remains the most critical challenge hindering the large-scale application of amine-based carbon dioxide (CO2) capture. To overcome this challenge, we developed an integrated CO2 absorption-mineralisation (IAM) process in which the amine sorbent can be regenerated by a chemical method rather than the traditional thermal method. We investigated the technical feasibility of IAM and the associated mechanisms by adding calcium oxide or fly ash into CO2-loaded amine solutions, including the five commonly used amines: monoethanolamine, diethanolamine, piperazine (PZ), N-methyldiethanolamine and 2-amino-2-methy-1-propanol. The performance stability of the optimised amine was verified in multicycle experiments. We also investigated the technical feasibility of IAM in practical applications using fly ash as a feedstock for absorbent regeneration. The CO2 absorption and mineralisation experiments were performed in a bubble column and a stirred reactor respectively. Acid titration was used to measure the CO2-loading of solid and liquid sample. FT-IR spectroscopy was used to analyse the species changes in the amine solutions during regeneration. The crystalline phases present in fresh and carbonated fly ash samples were determined by X-ray diffraction analysis. The results indicate that CO2 absorbed by the five amine solutions was sequestered into carbonate precipitates at a moderate temperature (40 degrees C) and the amine absorbents were regenerated after carbonation reactions. PZ exhibited the largest cyclic loading (0.72 mol/mol) and regeneration efficiency (91%) among the five amines. PZ also achieved stable cyclic loading, regeneration efficiency and kinetic performance over five cycles of IAM experiments. When the industrial waste, fly ash was used, PZ displayed a cyclic loading of 4.2 mol/mol, lower than that of CaO but still 1.1 times higher than that of the thermal regeneration-based process. Compared with the traditional thermal regeneration-based CO2 capture, the IAM process has great advantages in energy reduction and capital savings due to a larger cyclic CO2 capacity, a requirement for less energy for amine regeneration and no need for CO2 compression and pipeline transport. This technology has great potential for industrial applications, particularly with CaO-containing wastes, such as fly ash and other alkaline wastes.

Integrated Absorption–mineralisation for Energy-Efficient CO2 Sequestration: Reaction Mechanism and Feasibility of Using Fly Ash As a Feedstock

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Single-step Integrated CO2 Absorption and Mineralization Using Fly Ash Coupled Mixed Amine Solution: Mineralization Performance and Reaction Kinetics

Single-step integrated CO 2 absorption and mineralization using fly ash coupled mixed amine solution: Mineralization performance and reaction kinetics

Integrated Absorption-Mineralisation for Low-Energy CO2 Capture and Sequestration

Coupling a Sterically Hindered Amine-Based Absorption and Coal Fly Ash Triggered Amine Regeneration: A High Energy-Saving Process for CO2 Absorption and Sequestration

A Diamine-Based Integrated Absorption-Mineralization Process for Carbon Capture and Sequestration: Energy Savings, Fast Kinetics, and High Stability

Integration of a Diamine Solvent Based Absorption and Coal Fly Ash Based Mineralisation for CO2 Sequestration

Synergistic Promoting of CO2 Absorption-Mineralization by MEA-carbide Slag

Experimental Investigation of Amine Regeneration for Carbon Capture through CO2 Mineralization

Diisobutylamine Mediated CO2 Mineralization and CaCO3 Production from Municipal Solid Waste Incineration Fly Ash As Raw Ingredient and Regeneration Reagent

Feasibility and Mechanism of an Amine-Looping Process for Efficient CO2 Mineralization Using Alkaline Ashes

Solid Waste of Fly Ash toward Energy-Efficient CO 2 Capture

Electrochemically Mediated Amine Regeneration-CO2 Mineralization: Mechanism and Influencing Factors

Electrochemically mediated amine Regeneration-CO 2 mineralization: Mechanism and influencing factors

Integrated Process Of Monoethanolamine-Based Co2 Absorption And Co2 Mineralization With Sfgd Slag: Process Simulation And Life-Cycle Assessment Of Co2 Emission

Coupling a Diamine-Based Absorption with Fly Ash Triggered Amine Regeneration: an Integrated Carbon Capture and Mineralisation Process with High Efficiency and Low Energy Consumption

Research on Integrated CO2 Absorption-Mineralization and Regeneration of Absorbent Process

Integrated CO 2 absorption-mineralization process by the MEA + MDEA system coupled with Ba(OH) 2 : Absorption kinetics and mechanisms

An Integrated Absorption-Mineralization Process for CO<sub>2</sub> Capture and Sequestration: Reaction Mechanism, Recycling Stability, and Energy Evaluation

Fly ash as a cost-effective catalyst to promote sorbent regeneration for energy efficient CO 2 capture