Abstract:NiAl intermetallics is considered to be a potential high temperature structural material based on a high melting point, low density, high thermal conductivity, excellent oxidation and hot-corrosion resistance at elevated temperatures [1–4], but its high temperature strength is insufficient for the majority of actual applications. The tensile ductility and fracture toughness at ambient temperatures are often also unsatisfactory [5, 6]. The solid solution strengthening, precipitation strengthening, directional solidification and single crystal technique have been explored to improve its high temperature strength. Although significant progress has been achieved, the ambient tensile ductility and fracture toughness often deteriorate as a result. On the other hand, the ductility and toughness can also be improved by microalloying, macroalloying and plastic secondary phase additions, but this is at the expense of the strength [4–7]. In other words, it is very difficult to compromise its high temperature strength and ambient temperature ductility. This severely restricts its operating temperature and deteriorates its machinability. It is significant to explore novel fabricaturing techniques for NiAl intermetallic alloy to improve its comprehensive mechanical properties. Preparing intermetallic matrix composite is an effective method to produce engineering NiAl intermetallic alloy and to improve its high temperature strength and retain ambient temperature ductility simultaneously [8, 9]. Good ductility can be obtained through adequately alloying the intermetallic matrix while the strength is improved with the reinforcements. The casting, combustion synthesis, powder metallurgy and mechanical alloying are major methods for preparing NiAl intermetallic matrix composites. Nevertheless, in many cases, the mechanical bonding due to no interfacial reaction, or the brittle reactive products existing at the interface between matrix and reinforcement due to excessive interfacial reaction often result in weak interfacial bonding so that whole properties

Exploring the Interfacial State and Tensile Behaviors in Nickel Matrix Composite with In-Situ TiC and Γ′-Ni3(al,ti) Reinforcements

Optimizing the Microstructure and Mechanical Behaviors of In-Situ TiC-γ′/Ni Composites by Subsequent Thermal Treatment

Achieving high performance in (NiTi<sub>2</sub> + TiC)/Ti composites with network architecture via reaction interface design

Towards High Performance in Ti-based Composite Through Manipulating Nickel Coatings on Graphene Reinforcement

Ni composites reinforced with ultrafine and uniform TiCx and Cr3C2 particles in situ: Enhanced properties and a well-matched interface

Investigation on High Temperature Mechanical Behaviors of TiC-γ′ Reinforced Ni Composite

Interface Evolution and Mechanical Properties of Nickel Coated Graphene Nanoflakes/pure Titanium Matrix Composites

Microstructure of Multilayer Interface in an Al Matrix Composite Reinforced by TiNi Fiber.

Microstructure evolution and mechanical properties of TC4/Ni metallic-intermetallic laminated composites: Formation and strengthening effects of Ti2Ni phases

Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/ pure titanium matrix composites

In-situ hybrid Cr3C2 and γ′-Ni3(Al, Cr) strengthened Ni matrix composites: Microstructure and enhanced properties

Preparation of Nickel-Coated Titanium Carbide Particulates and Their Use in the Production of Reinforced Iron Matrix Composites

Ni-Base Superalloys Enhanced by In-Situ Mc Carbides Precipitant on Tic Nanoparticles

CNTs/Cu-Ti Composites Fabrication Through the Synergistic Reinforcement of CNTs and in Situ Generated Nano-Tic Particles

Novel titanium matrix composites reinforced by NiCoCr medium entropy particles

Interfacial Microstructures and Mechanical Properties of TiC Reinforced GH 3230 Superalloy Manufactured by Laser Metal Deposition

Improving Wear Resistance of TiNi Matrix Composites Reinforced by Carbon Nanotubes and in Situ TiC

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

High Strength and High Ductility in Nickel Matrix Nanocomposites Reinforced by Carbon Nanotubes and Onion-Like-carbon Hybrid Reinforcements

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Direct Laser Fabricated in Situ TiC Particulate Reinforced Ni30Al20Fe Intermetallic Matrix Composite