Abstract:To enhance the refrigeration efficiency of the thermoelectric and vapor compression hybrid refrigeration system and optimize the allocation of power during system operation, a dimensionless parameter, the power allocation ratio coefficient ( θ ), is proposed. It represents the ratio of the input power of the thermoelectric refrigeration system to the total input power. A mathematical model of the hybrid refrigeration system is established to investigate the impact of θ on the cooling temperature ( T c ), cooling capacity ( Q c ), and coefficient of performance (COP) of the system. An experimental platform is constructed to validate the mathematical model and explore the relationship between the optimal θ and system operating parameters. The findings demonstrate that, under a constant total input power, as the θ increases, the cooling temperature initially decreases and then increases, whereas the Q c and COP first increase and then decrease. There exists an optimal power allocation relationship for the two-stage refrigeration system, which maximizes the refrigeration performance of the hybrid refrigeration system. When the total input power is 100 W, the optimum θ is 0.52, resulting in a cooling temperature of −55.23 °C and a COP of 0.13. As the total input power increases, the optimal θ decreases. The cooling temperature rises, the optimal θ increases. The ambient temperature increases, the optimal θ also increases. An optimized relationship equation is obtained by fitting the calculated results of the operating parameters and the optimal θ , providing a theoretical basis for the control of power allocation in practical operation of the two-stage refrigeration system within the hybrid refrigeration system.

Coefficient of Performance at Maximum Χ-Criterion of Thermochemical Refrigerators with Near-Independent Particles

Performance Optimization of an Irreversible Carnot Refrigerator with Finite Mass Flow Rate

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Design Optimization of Thermoelectric Cooling Systems for Applications in Electronic Devices

Coefficient of performance at maximum figure of merit and its bounds for low-dissipation Carnot-like refrigerators

Universality of energy conversion efficiency for optimal tight-coupling heat engines and refrigerators

Optimal Performance of a Three-level Quantum Refrigerator

Optimization performance of quantum Otto heat engines and refrigerators with squeezed thermal reservoirs

Thermodynamic Performances of Coupled Autonomous Heat Devices: Insights from the Trade-off Optimization

Performance at maximum figure of merit for a Brownian Carnot refrigerator

Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator

A theoretical study on the performances of thermoelectric heat engine and refrigerator with two-dimensional electron reservoirs

OPTIMIZATION OF THE PERFORMANCE OF AN AUTO-CASCADE REFRIGERATOR WITH A LIQUID-GAS SEPARATOR USING ENVIRONMENTALLY BENIGN BINARY REFRIGERANTS

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Performance optimization of thermoelectric and vapor compression hybrid refrigeration system by allocating power

Performance Analysis and Comparison Study of Transcritical Power Cycles Using Co2-Based Mixtures As Working Fluids

Maximum efficiency of low-dissipation refrigerators at arbitrary cooling power

Efficiency estimation for an equilibrium version of Maxwell refrigerator