Abstract:Semiconductor refrigeration utilizes Peltier effects to achieve cooling, and does not use any refrigerants. Due to its simple and compact structure, semiconductor refrigeration has become one of the most promising cooling technologies. However, as a semiconductor refrigeration system, the interactions among the main external factors that affect its performance are complicated. Based on experimental results and thermodynamic models, deeper insights are presented into semiconductor refrigeration in this study. Broader coupling between performance and main external parameters are analyzed, including the driving voltage of fans at both the hot and cold sides, and the working voltage of the semiconductor refrigeration chip. Optimal external parameters corresponding to a maximum COP and a maximum cooling capacity are obtained. For example, under the optimal working voltage of a semiconductor refrigeration chip with a fan driving voltage of 4 V at the hot side and 6 V at the cold side, Q(c,max) was increased by 60%, and was 326% higher than chips under 2 V and 10 V working voltages. Under the optimal fan driving voltage at the hot side with a 6 V fan driving voltage at the cold side and a 3 V working voltage of the chip, the maximum value of COP was respectively 140.3% and 104.3% larger than those with 0 V and 12 V fan driving voltages at the hot side. It is also found that the driving voltage of fans at the hot side has a greater influence on the optimal working voltage of a semiconductor refrigeration chip. This investigation could be applied in the optimization of the design and operational control of semiconductor refrigeration systems. (C) 2019 Elsevier Ltd and IIR. Allrights reserved.

Coefficient of performance at maximum figure of merit and its bounds for low-dissipation Carnot-like refrigerators

Performance Optimization of an Irreversible Carnot Refrigerator with Finite Mass Flow Rate

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Maximum efficiency of low-dissipation refrigerators at arbitrary cooling power

Performance at maximum figure of merit for a Brownian Carnot refrigerator

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Optimisation Of An Irreversible Carnot Refrigerator Working Between Two Heat Reservoirs

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Efficiency at maximum power output of an irreversible Carnot-like cycle with internally dissipative friction

Optimal Performance of a Three-level Quantum Refrigerator

Maximum efficiency of absorption refrigerators at arbitrary cooling power

Thermodynamic Performances of Coupled Autonomous Heat Devices: Insights from the Trade-off Optimization

Discussion on refrigeration cycle for regenerative cryocoolers

Performance optimization on the irreversible regenerative Ericsson refrigeration cycle using electrocaloric materials as the working medium

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications