Abstract:By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ${\sim}{77}\% $∼77% and beam quality of ${\rm M}_x^2\sim {1.25}$Mx2∼1.25, ${\rm M}_y^2 \sim {1.17}$My2∼1.17. The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.

10 watt-level tunable narrow linewidth $1.5~unicode[STIX]｛x03BC｝ ext｛m｝$ all-fiber amplifier

10 watt-level tunable narrow linewidth all-fiber amplifier

Wavelength, repetition rate, and pulse width tunable high average power narrow linewidth 1.5 μm fiber amplifier

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Confined-doped fiber enabled kilowatt-level all-fiber laser with 1.28 GHz linewidth

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

5 Kw Power-Level 1050 Nm Narrow-Linewidth Fiber Amplifier Enabled by Biconical-Tapered Active Fiber

Narrow-Linewidth 2 m All-Fiber Laser Amplifier with a Highly Stable and Precisely Tunable Wavelength for Gas Molecule Absorption in Photonic Crystal Hollow-Core Fibers

A 3.2 Kw Single Stage Narrow Linewidth Fiber Amplifier Emitting at 1050 Nm

Narrow-Linewidth 2 μm All-Fiber Laser Amplifier with a Highly Stable and Precisely Tunable Wavelength for Gas Molecule Absorption in Photonic Crystal Hollow-Core Fibers

>1 kW all-fiberized narrow-linewidth polarization-maintained fiber amplifiers with wavelength spanning from 1065 to 1090 nm.

20 Watt-Level Single Transverse Mode Narrow Linewidth and Tunable Random Fiber Laser at 1.5 Μm Band.

2.58 kW Narrow Linewidth Fiber Laser Based on a Compact Structure with a Chirped and Tilted Fiber Bragg Grating for Raman Suppression

High efficient 120W 1018nm single-frequency narrow linewidth amplification based on wide-tunable DBR fiber seed source

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

325 kW all-fiberized and polarization-maintained Yb-doped amplifier with a 20 GHz linewidth and near-diffraction-limited beam quality

Widely Tunable Sub-Khz Linewidth Tm3+-doped Single-Frequency Fiber Laser

High-Power Tunable Mid-Infrared Fiber Gas Laser Source By Acetylene-Filled Hollow-Core Fibers

CW Tunable 3 μm Fiber Gas Laser Source

Watts-Level Super-Compact Narrow-Linewidth Tm-Doped Silica All-Fiber Laser Near 1707 Nm with Fiber Bragg Gratings

Watt-level Tunable 15 Μm Narrow Linewidth Fiber Ring Laser Based on a Temperature Tuning Π-Phase-shifted Fiber Bragg Grating