Abstract:A pure natural kaolinite (K) was modified by intercalation and grafting into the interlayer space of 1-(2-hydroxyethyl)piperazine (HEP). The resulting organo-inorganic hybrid material (referred as KHEP) was characterised using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and 29Si nuclear magnetic resonance (NMR) techniques. The electrochemical characterisation of K and KHEP materials was carried out by studying the electrochemical behaviour using cyclic voltammetry of [Fe(CN)6]3− ions on the surface of a glassy carbon electrode (GCE) modified with a film of each of these materials (GCE/K and GCE/KHEP). The GCE/KHEP organokaolinite film electrode was successfully applied for the simultaneous detection of Pb(II) and Cu(II) in contaminated media. The peak currents of Pb(II) and Cu(II) obtained under the same optimal conditions on GCE/KHEP were much more intense than those obtained on GCE/K and bare GCE. Under optimal conditions, the influence of the concentration of Cu2+ and Pb2+ ions on the peak currents was studied for several concentration ranges. The obtained linear calibration curves were then used to calculate the different limits of detection (LOD) on the basis of a signal-to-noise ratio of 3. Thus, in simultaneous detection and for the concentration range from 0.02 to 0.12 μmol L−1 (pH accumulation medium 5.0) and for each of the ions analysed, LODs of 1.942 nmol L−1 for Cu(II) and a LOD of 1.072 nmol L−1 for Pb(II) were obtained. The GCE/KHEP sensor developed in this work was successfully applied for the simultaneous detection of Pb(II) and Cu(II) in real samples. ASSWV signal corresponding to the simultaneous detection of Pb2+ and Cu2+ ions recorded on unmodified GCE (black curve), GCE/K; (red curve) and GCE/KHEP (blue curve) in 0.2 mol L−1 NaNO3 (with pH adjusted at 2.5) after 7 min of accumulation in aqueous medium (pH 5.0) of each ion at the concentration at 2.0 μmol L−1. Other experimental conditions are as follows: telec: 80 s, Eelec: − 0.90 V, Potential amplitude: 0.05 V, Step potential (V): 0.005 V and Frequency: 50 Hz.

An Electrochemical Sensor Based on Green Γ-Alooh-carbonated Bacterial Cellulose Hybrids for Simultaneous Determination Trace Levels of Cd(II) and Pb(II) in Drinking Water

An Efficient Electrochemical Sensor Based on Three-Dimensionally Interconnected Mesoporous Graphene Framework for Simultaneous Determination of Cd(Ii) and Pb(Ii)

Simultaneous Determination of Cd(II) and Pb(II) Based on Bismuth Film/Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes-β-cyclodextrin-Nafion Nanocomposite Modified Electrode

The effective determination of Cd(ii) and Pb(ii) simultaneously based on an aluminum silicon carbide-reduced graphene oxide nanocomposite electrode.

Simultaneous Detection of Trace Cd(II) and Pb(II) by Differential Pulse Anodic Stripping Voltammetry Using a Bismuth Oxycarbide/nafion Electrode

UiO-66 Based Electrochemical Sensor for Simultaneous Detection of Cd(II) and Pb(II)

A nanocomposite consisting of ionic liquid-functionalized layered Mg(II)/Al(III) double hydroxides for simultaneous electrochemical determination of cadmium(II), copper(II), mercury(II) and lead(II)

Simultaneous quantification of cadmium and lead ions using β-cyclodextrin functionalized poly(amino acid) electrochemical sensor

Simultaneous and Sensitive Detection of Cd(II) and Pb(II) Using a Novel Bismuth Film/Ordered Mesoporous Carbon-molecular Wire Modified Graphite Carbon Paste Electrode

Simultaneous determination of trace Cd(II) and Pb(II) based on Bi/Nafion/reduced graphene oxide-gold nanoparticle nanocomposite film-modified glassy carbon electrode by one-step electrodeposition

Three-dimensional Carbon Nanofiber Derived from Bacterial Cellulose for Use in a Nafion Matrix on a Glassy Carbon Electrode for Simultaneous Voltammetric Determination of Trace Levels of Cd(II) and Pb(II)

Ultra-sensitive simultaneous electrochemical detection of Zn(II), Cd(II) and Pb(II) based on the bismuth and graphdiyne film modified electrode

Electrochemical sensor based on a thin film of organokaolinite material modified glassy carbon electrode (GCE) and application to the simultaneous sensitive detection of Pb2+ and Cu2+ ions in contaminated water

A Tablet-Operated Portable Wireless Sensing Platform for Field Simultaneous Rapid Detection of both Cd (II) and Pb (II) Using CaAl-Layered Double Hydroxide Nanocomposite Modified Integrated Screen-Printed Three-Electrode

A Sensitive Electrochemical Sensor for Simultaneous Voltammetric Sensing of Cadmium and Lead Based on Fe3O4/multiwalled Carbon Nanotube/laser Scribed Graphene Composites Functionalized with Chitosan Modified Electrode

Simultaneous Determination of Cd2+ and Pb2+ by an Electrochemical Sensor Based on Fe3O4/Bi2O3/C3N4 Nanocomposites

A Carbon-Supported BiSn Nanoparticles Based Novel Sensor for Sensitive Electrochemical Determination of Cd (II) Ions

N-Doped Hollow Porous Carbon Spheres/Bismuth Hybrid Film Modified Electrodes for Sensitive Voltammetric Determination of Trace Cadmium

Computer-Aided Design and Construction of a Novel Electro-Responsive Ion-Imprinted Sensor for the Individual/Simultaneous Detection of Cd(Ii) and Pb(Ii) in Water Environments

Hierarchical MgFe-layered Double Hydroxide Microsphere/graphene Composite for Simultaneous Electrochemical Determination of Trace Pb(II) and Cd(II)

Abts-Multiwalled Carbon Nanotubes Nanocomposite/Bi Film Electrode for Sensitive Determination of Cd and Pb by Differential Pulse Stripping Voltammetry