Abstract:A pure natural kaolinite (K) was modified by intercalation and grafting into the interlayer space of 1-(2-hydroxyethyl)piperazine (HEP). The resulting organo-inorganic hybrid material (referred as KHEP) was characterised using X-ray diffraction (XRD), Fourier transform infrared (FTIR) and 29Si nuclear magnetic resonance (NMR) techniques. The electrochemical characterisation of K and KHEP materials was carried out by studying the electrochemical behaviour using cyclic voltammetry of [Fe(CN)6]3− ions on the surface of a glassy carbon electrode (GCE) modified with a film of each of these materials (GCE/K and GCE/KHEP). The GCE/KHEP organokaolinite film electrode was successfully applied for the simultaneous detection of Pb(II) and Cu(II) in contaminated media. The peak currents of Pb(II) and Cu(II) obtained under the same optimal conditions on GCE/KHEP were much more intense than those obtained on GCE/K and bare GCE. Under optimal conditions, the influence of the concentration of Cu2+ and Pb2+ ions on the peak currents was studied for several concentration ranges. The obtained linear calibration curves were then used to calculate the different limits of detection (LOD) on the basis of a signal-to-noise ratio of 3. Thus, in simultaneous detection and for the concentration range from 0.02 to 0.12 μmol L−1 (pH accumulation medium 5.0) and for each of the ions analysed, LODs of 1.942 nmol L−1 for Cu(II) and a LOD of 1.072 nmol L−1 for Pb(II) were obtained. The GCE/KHEP sensor developed in this work was successfully applied for the simultaneous detection of Pb(II) and Cu(II) in real samples. ASSWV signal corresponding to the simultaneous detection of Pb2+ and Cu2+ ions recorded on unmodified GCE (black curve), GCE/K; (red curve) and GCE/KHEP (blue curve) in 0.2 mol L−1 NaNO3 (with pH adjusted at 2.5) after 7 min of accumulation in aqueous medium (pH 5.0) of each ion at the concentration at 2.0 μmol L−1. Other experimental conditions are as follows: telec: 80 s, Eelec: − 0.90 V, Potential amplitude: 0.05 V, Step potential (V): 0.005 V and Frequency: 50 Hz.

Electrochemical sensor based on a thin film of organokaolinite material modified glassy carbon electrode (GCE) and application to the simultaneous sensitive detection of Pb2+ and Cu2+ ions in contaminated water

An Active-Conductive Layer Stacked Sensor Platform for Real-Time Detection of Heavy Metal Ions

Simultaneous Determination of Heavy Metal Ions with GNs/6F-S-BI-PAEK Composite Film Modified Glassy Carbon Electrode

Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II)

A nanocomposite consisting of ionic liquid-functionalized layered Mg(II)/Al(III) double hydroxides for simultaneous electrochemical determination of cadmium(II), copper(II), mercury(II) and lead(II)

Ultra-sensitive simultaneous electrochemical detection of Zn(II), Cd(II) and Pb(II) based on the bismuth and graphdiyne film modified electrode

An Efficient Electrochemical Sensor Based on Three-Dimensionally Interconnected Mesoporous Graphene Framework for Simultaneous Determination of Cd(Ii) and Pb(Ii)

Electrochemical Study of Methoxykaolinite Interactions with Cations and Application to Trace-Level Detection of Pb(II) in Various Aqueous Media

A simple strategy for the detection of Pb(II) and Cu(II) by an electrochemical sensor based on Zn/Ni-ZIF-8/XC-72/Nafion hybrid materials

Simultaneous Determination of Copper, Lead, and Cadmium Ions at A Mo6s9-Xix Nanowires Modified Glassy Carbon Electrode Using Differential Pulse Anodic Stripping Voltammetry

Development of a novel sensor based on Bi2O3 and carbonized UIO-66-NH2 nanocomposite for efficient detection of Pb(II) ion in water environment

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Nanoporous Gold-Modified Screen-Printed Electrodes for the Simultaneous Determination of Pb2+ and Cu2+ in Water

Core–Shell Chitosan Cobalt Ferrite Nanoparticles for Ultrasensitive Simultaneous Voltammetric Determination of Pb(II) and Cd(II)

Electrochemical Detection of Lead in Real Samples Using Carbon Nanostructure and Inactivated E. coli as Low-Cost Sensitive Biosensor with High Electrocatalytic Performance

Electrochemical sensor of Cu nanoparticles on Cu based metal organic frame works hybridized indium tin oxides glasses for Pb 2+ detection

Simultaneous Detection of Cd2+ and Pb2+ with a Bismuth Film/Sulfur and Nitrogen Co-Doped Porous Graphene Electrode

Highly selective simultaneous electrochemical detection of trace level of heavy metals in water samples based on the single-crystalline Co3O4 nanocubes modified electrode

Electrochemical Detection of Cd2+, Pb2+, Cu2+ and Hg2+ with Sensors Based on Carbonaceous Nanomaterials and Fe3O4 Nanoparticles

A Tablet-Operated Portable Wireless Sensing Platform for Field Simultaneous Rapid Detection of both Cd (II) and Pb (II) Using CaAl-Layered Double Hydroxide Nanocomposite Modified Integrated Screen-Printed Three-Electrode

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode