Abstract:Recently, metal-organic frameworks (MOFs) and their carbon derivates have been demonstrated as new electrode modifying materials for electrochemical sensing. In this work, the first example of the detection of heavy metal ions with a MOF-derived sensing platform was presented. The platform was based on a glassy carbon electrode (GCE) modified by Nafion-bismuth/nitrogen doped microporous carbon (NMC) composite, in which the NMC was derived from a zeolitic imidazolate framework-8 (ZIF-8). The good dispersibility, large specific surface area (941 m2g−1), high nitrogen content (25.0 at.%) and good electrical conductivity of the NMC materials, as well as the synergistic effects of Nafion and bismuth-film contributed to the enhanced signals of the electrode during the differential pulse anodic stripping voltammetry (DPASV) measurements for simultaneous detection of trace Cd(II) and Pb(II) in aqueous solution. The calibration curves for Cd(II) covered two linear ranges varying from 2 to 10μgL−1 and 10 to 100μgL−1. As for Pb(II), the linear calibration curves ranged from 0.5 to 10μgL−1 and 10 to 100μgL−1. The detection limits were estimated to be 1.5μgL−1 (S/N=3) for Cd(II) and 0.05μgL−1 (S/N=3) for Pb(II), which were 2 times and 200 times lower than the guideline values of drinking water given by the World Health Organization (WHO), for Cd(II) and Pb(II), respectively. In addition, the good reproducibility and stability of the modified electrode offered a promising perspective for the detection of trace metal ions in practice. Compared with other porous carbon modified electrodes that obtained by either drop-casting or screen-printing method, the proposed Nafion/Bi/NMC/GCE showed a much lower detection limit for Pb(II) and a lower or comparable detection limit for Cd(II). Moreover, the obtaining of uniformly ordered N-doped carbon polyhedron could shed light on the preparation of other heteroatom-doped electrode modifying materials for the detection of heavy metal ions.

N-Doped Hollow Porous Carbon Spheres/Bismuth Hybrid Film Modified Electrodes for Sensitive Voltammetric Determination of Trace Cadmium

Bismuth-Coated Thick-Film Carbon Electrodes for the Detection of Lead and Cadmium by Anodic Stripping Voltammetry

A Highly Sensitive Electrochemical Sensor for Cd(II) Based on Protic Salt Derived Nitrogen and Sulfur Co-Doped Porous Carbon.

Simultaneous Determination of Cd(II) and Pb(II) Based on Bismuth Film/Carboxylic Acid Functionalized Multi-Walled Carbon Nanotubes-β-cyclodextrin-Nafion Nanocomposite Modified Electrode

Bismuth Metal–Organic Framework/Carbon Nanosphere Composites for Ultrasensitive Simultaneous Electrochemical Detection of Lead and Cadmium

Hybrid hierarchically porous carbon micron tubes for trace cadmium and lead ions electrochemical detection

Simultaneous detection of Cd(II) and Pb(II) by differential pulse anodic stripping voltammetry at a nitrogen-doped microporous carbon/Nafion/bismuth-film electrode

Direct Electrodeposition of Carbon Dots Modifying Bismuth Film Electrode for Sensitive Detection of Cd2+ and Pb2+

Sensitive determination of Cd(II) by square wave anodic stripping voltammetry with in situ bismuth-modified multiwalled carbon nanotubes doped carbon paste electrodes

Ultrasensitive Voltammetric Detection of Trace Lead(II) and Cadmium(II) Using MWCNTs‐Nafion/Bismuth Composite Electrodes

Direct Electrodeposition of Carbon Dots Modifying Bismuth Film Electrode for Sensitive Detection of Cd 2+ and Pb 2+

Protic salt-based nitrogen-doped mesoporous carbon for simultaneous electrochemical detection of Cd(II) and Pb(II)

A Carbon-Supported BiSn Nanoparticles Based Novel Sensor for Sensitive Electrochemical Determination of Cd (II) Ions

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode

Simultaneous Detection of Trace Cd(II) and Pb(II) by Differential Pulse Anodic Stripping Voltammetry Using a Bismuth Oxycarbide/nafion Electrode

Ultrasensitive Sensor Based on Novel Bismuth Carbon Nanomaterial for Lead and Cadmium Determination in Natural Water, Contaminated Soil and Human Plasma

A Composite with Botryoidal Texture Prepared from Nitrogen-Doped Carbon Spheres and Carbon Nanotubes for Voltammetric Sensing of Copper(ii)

Sensitive Electrochemical Quantification of Trace Lead and Cadmium of Food Samples Based on B, N, S, and P-multiple-doped Framework-Based Carbon Aerogels

Porous B3C3N2 Matrix-Based Electrochemical Sensor for Sensitive Determination of Trace Cadmium in Environmental and Tobacco Samples

In Situ Bismuth-Modified Gallium Nitride Electrode for Sensitive Determination of Cadmium (II) with High Repeatability

Application of Bi/PEDOT Composite Modified Electrode in High-Performance Cd (II) Detection Sensor