Abstract:The article proposes three lumped-distributed resonators, each of which introduces two transmission zeros (TZ) at real frequencies into the transfer function of inline bandpass filter (BPF). The use of such resonators in mixed-coupled BPFs without cross-coupling increases the number of TZs from ( $N + 1$ ) to (3 $N + 1$ ). It improves the filter performance. Lumped-distributed resonators represent a stepped-impedance or uniform transmission line segment to which one capacitance or inductance is connected in cascade. These resonators have two antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ , which are placed next to the main resonant frequency $\omega _{0}$ , which leads to two TZs. Antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ are the poles of the input admittance $Y(j\omega )$ , their position is controlled by the parameters of the resonators. Lumped-distributed resonators can form equidistant TZ pairs, including those of higher degree, allowing the implementation of BPFs with quasielliptic frequency responses and improved selectivity. It has been established that reducing Q-factors of inductor $Q_{L}$ and capacitor $Q_{C}$ do not increase the insertion loss in the passband of BPF. A design method for BPF with mixed couplings between adjacent resonators is established. It is also suitable for filters that use the proposed resonators. As result, the TZ number of such BPFs is increased from ( $N$ $+$ 1) to (3 $N + 1$ ).

Bandpass Filters with N + 1 Transmission Zeros Using Λ/4 Resonator and Λ/2 Resonator

Bandpass Filters With N+1 Transmission Zeros Using Lambda/4 Resonator And Lambda/2 Resonator

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

N+1 transmission zeros in Nth-order cross-coupled filter with mixed source and load coupling (MSLC)

A Novel Nth-order Microstrip Dual-Mode Bandpass Filter with N&#x002B;2 Transmission Zeros

Lumped-Distributed Resonators Providing Multiple Transmission Zeros in Bandpass Filters With Simple and Mixed Couplings

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

Bandpass Filter Using Three Pairs of Coupled Lines with Multiple Transmission Zeros

Bandpass Filter Using Dual Series-Cascaded Ring Resonators with Multiple Transmission Zeros

A W-Band Bandpass Filter with Dual Behavior Resonators Fabricated by Additive Manufacturing

Fourth-Order Bandpass Filter Using Dual-Mode Ring Resonator and Parallel-Coupled Lines

Miniaturized Dual-Band Bandpass Filter with Multiple Transmission Zeros

Novel compact band-pass filter with three transmission zeros

A design method for filter to achieve arbitrary distribution of multiple transmission zeros without cross-coupling

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

Dual-Band Bandpass Filter with Multiple Controllable Transmission Zeroes and Wide Stopband

Synthesis of Fully Canonical Wideband Bandpass Filters with Complex Reflection Zeros

Microstrip Filter with Multiple Transmission Zeros Using Shorted Stub Loaded Resonators

High Selective Bandpass Filter with Controllable Transmission Zeros

Compact Microstrip Dual-Band Bandpass Filter with Multiple Transmission Zeros

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros