Abstract:The Aluminum–Silicon (Al–Si) die-casting alloys, such as the commercial A356 alloy, are expected to be used in heat-sink and the device with high thermal conductivity due to their high production efficiency of casting process. These fields also required them to possess sound mechanical properties. To meet these demands, the Strontium (Sr) was often utilized to modify the silicon phase. According to our current work, the secondary dendrite arm spacing of the α-Al grains prominently was decreased when 0.05%–0.25% strontium was added. The decrease of the secondary dendrite arm spacing (SDAS) lead to the enhancement of the mechanical strength as well as the improvement of the thermal and electrical conductivity. When the Sr dosage was 0.15% in the commercial A356 alloy, the strength and the thermal conductivity of the A356 alloy simultaneously reached the maximum value. The improvement of the electrical and thermal conductivity might by contributed by the formation of a good conductor, Al2Si2Sr phase, on the Si surface. Further investigations suggested that the improvement of thermal conductivity was mainly due to the modification effect of Sr on the eutectic Si phase, which enlarged the specific area between the α-Al/eutectic Si interface. The WDS analysis indicated that the solubility of Si decreased in aluminum matrix by increasing in the Sr dosage. However, the excessive dosage of strontium would result in the coarsening of the modified silicon phase, deteriorating the strength and the thermal and electrical conductivity of the modified A356 alloys.<h3 class="a-plus-plus">Graphic </h3> In this work, the commercial A356 alloy was modified by adding small amounts of strontium (Sr). This kind of aluminum alloy with sound fluidity could be formed by using casting process, and it was potential to be applied in the structural parts. After the Sr modification, the plate-like silicon (Si) phase was transformed to fibrous shape in the raw commercial A356. Meanwhile, it was found that the content of silicon in the Al solid solution was reduced.The XRD and SEM analysis suggested that the Al2Si2Sr phase was formed on the modified silicon phase, which was favorable to the conduction of free electron.

Synchrotron Radiation Micro-Beam Analysis of the Effect of Strontium on Primary Silicon in Zn–27Al–3Si Alloy

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Effects of Strontium Impurity on the Structure and Dynamics of Al88si12 Liquid

Effects of Sr on Microstructure and Mechanical Properties of Mg-9al-1si-0.3zn Alloy

Effect of Sr Modification on the Microstructures, Mechanical Properties, and Thermal Conductivity of Hypoeutectic Al-13.6Cu-6Si Alloys

Effect of Trace Strontium Addition on Microstructure and Room Temperature Fracture Toughness of Nb-12Si-22Ti Alloys

Effects of Zr and Sr on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg alloy

Effect of Silicon on Precipitates of High-Silicon Austenitic Stainless Steel

Effects of Sr on Fe-rich intermetallics in recycled Al–Si–Cu alloys

Characterization of the Morphology of Primary Silicon Particles Using Synchrotron X-ray Tomography

Simultaneous Improvement of Thermal Conductivity and Strength for Commercial A356 Alloy Using Strontium Modification Process

Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloys

Simultaneous Refinement of Primary Si and Modification of Eutectic Si in A390 Alloy Assisting by Sr-Modifier and Serpentine Pouring Channel Process

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Effects of Strontium and Boron Interactions in Al-7si Alloys

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys

Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al-Si alloy

Effects of Antimony- and Tin-Doping on the Mechanical Propertiesof Czochralski Silicon: Revealing the Role of Electrical Activity of Antimony

Effect of Sr on Microstructure and Strengthening Mechanism of Al-4.6Mg Alloy