Abstract:Due to their biocompatibility and wear resistance, ceramic materials have gained significant attention as excellent options to meet the growing demand for scaffolds in bone-defect treatment. However, current ceramic materials suffer from high hardness and unfavorable structure for the flow of body fluids, thus requiring the design of porous scaffolds. In this study, beta-tricalcium phosphate (beta-TCP), hydroxyapatite (HA), and 45S5 Bioglass (R) (BG) were selected to prepare scaffolds with the gyroid structure using digital light processing (DLP) technology. Then the scaffolds' surface, structure, mechanical properties, and biological performance were characterized. The results verified that gyroid structures with different porosity could be well tailored by adjusting the original functions, meanwhile the details of the models were preserved during the DLP printing and sintering process. In addition, different shrinkage patterns were observed, with microscale shrinkage being larger than macroscale shrinkage. There was an excessive increase in the material width after the curing process, but the structure thickness decreased during the sintering phase. Notably, the elastic modulus increased as the porosity of the scaffold decreased. During the sintering process, the BG underwent crystallization reactions, while the HA experienced decomposition. In vitro experiments demonstrated that the scaffolds exhibited no toxicity and displayed excellent biocompatibility, making them suitable for cell growth and adhesion. And the ability of the scaffolds to promote cell proliferation and osteogenic differentiation was better with the increase in porosity. Besides, the newly formed bone tissue within the scaffold exhibited characteristics similar to cortical bone, both after 3 and 6 months in vivo. This study showed that the gyroid scaffold with high porosity (65.67 %) has a remarkable capacity to promote cortical bone healing and holds great promises in the future treatment of bone defects.

Fabrication and Properties of Si3N4 Bioscaffolds with Orderly–interconnected Big Pore Channels and Well–distributed Small Pores

3D-Printed Bioceramic Scaffolds with High Strength and High Precision

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

Silk Fibroin 3D Microparticle Scaffolds with Bioactive Ceramics: Chemical, Mechanical, and Osteoregenerative Characteristics

369Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect

Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

Tuning filament composition and microstructure of 3D-printed bioceramic scaffolds facilitate bone defect regeneration and repair

3D Printing Bioceramic Porous Scaffolds with Good Mechanical Property and Cell Affinity

Preparation and Characterization of 3D Printed Porous 45S5 Bioglass Bioceramic for Bone Tissue Engineering Application

Fabrication of Porous Beta-Tricalcium Phosphate with Microchannel and Customized Geometry Based on Gel-Casting and Rapid Prototyping.

Sustained release silicon from 3D bioprinting scaffold using silk/gelatin inks to promote osteogenesis

Porous β-Ca2SiO4 ceramic scaffolds for bone tissue engineering: In vitro and in vivo characterization

Hydrothermal Deposition of PCN‐224 on 3D‐Printed Porous β‐Ca <sub>2</sub> SiO <sub>4</sub> Scaffolds for Bone Regeneration

3D-Printed Triply Periodic Minimal Surface Bioceramic Scaffold for Bone Defect Treatment with Tunable Structure and Mechanical Properties

Fabrication and properties of CaSiO3/ Sr3(PO4)2 composite scaffold based on extrusion deposition

Custom Repair of Mandibular Bone Defects with 3D Printed Bioceramic Scaffolds

Rational Design of Bioceramic Scaffolds with Tuning Pore Geometry by Stereolithography: Microstructure Evaluation and Mechanical Evolution

Fabrication of 3D printed Ca3Mg3(PO4)4-based bioceramic scaffolds with tailorable high mechanical strength and osteostimulation effect