Abstract:The properties of superalloys are typically deteriorated by the coarsening of the nano-sized γ′ phase, which is the primary strengthening component at high temperatures. Stabilizing the γ′ phase represents one of the key challenges in developing next-generation superalloys. Herein, we fabricate a cobalt-nickel-based superalloy with a nanoscale coherent γ′ phase, (Ni,Co)3(Al,Ti,Nb), which is isolated by stacking-fault ribbons in the alloy matrix as a result of the Suzuki segregation of alloying atoms. Additionally, we demonstrate that this new nanostructure can slow down the coarsening of the γ′ phase at high temperatures. As a result, the cobalt-nickel-based superalloy displays considerably high tensile yield points, exceeding 1650 MPa at room temperature and 1250 MPa at 973 K, which are markedly higher than those of the commonly used nickel- and cobalt-based superalloys. This study thereby paves a new path for developing superalloys with exceptional mechanical performance and thermal stability. By using a novel nanostructure, a team has made a cobalt-based superalloy with a high tensile yield point whose γ' phase resists coarsening. Coarsening of the nanoscale γ' phase of superalloys — the process by which large particles grow at the expense of smaller ones — tends to degrade the properties of superalloys since the γ' phase is the main strengthening component at high temperatures. By isolating the γ' phase through forming stacking-fault ribbons in the alloy matrix via Suzuki segregation of the alloying atoms, Yunping Li of Central South University in China and collaborators at Tohoku University in Japan realized a cobalt-nickel-based superalloy with a tensile yield point of 1,650 megapascals at room temperature (1,250 megapascals at 973 kelvin). They consider this method to be promising for realizing superalloys with superior mechanical properties and thermal stability. A large number of multilayered stacking faults are detected along {111} planes during aging (arrows in a) of present superalloy. Every γ′ phase particle is isolated by multilayered stacking-fault ribbons and grows slightly. The coarsening rate of the γ′ phase decreases significantly after plastic deformation, implying that the formation of multilayered stacking-fault ribbons as a consequence of Suzuki segregation can obviously retard the coarsening of γ′ phase in this novel alloy.

New Type of Γ′ Phase in Ni Based Single Crystal Superalloys: Its Formation Mechanism and Strengthening Effect

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Influences of the Γ′ Phase on the Mechanical Properties of a Nickel-Based Single Crystal Superalloy

Influence of W, Re, Cr, and Mo on Microstructural Stability of the Third Generation Ni-based Single Crystal Superalloys

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Co-Alloying Effects On The Site Preference And The Elastic Properties Of Gamma '-Ni3al From First-Principles Calculations

Co-alloying effects on the site preference and the elastic properties of γ′-Ni3Al from first-principles calculations

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

Precipitation and growth behavior of γ′ phase in Ni3Al-based superalloy under thermal exposure

Effects of Alloying Elements on the Microstructure of Precipitation Strengthened Co-based Superalloys

Effect of Ti/Nb/Ta Addition on High-Temperature Microstructural Stability of Coherent Γ/γ′ in Ni–Al–(Cr,Mo,W) Superalloys

Atomic size effect of alloying elements on the formation, evolution and strengthening of γ′-Ni3Al precipitates in Ni-based superalloys

Effect of substituting Mo for W on γ/γ′ partitioning behaviors of alloying elements in heat-treated second generation Ni based single crystal superalloys: An atom probe tomography study

Composition and Temperature Dependence of Kinetic Behavior of Γ′ Precipitation in Ni–Al–Cr–Mo Quaternary Model Superalloys: A Phase Field Study

Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys

Precipitation and Growth Simulation of Γ′ Phase in Single Crystal Superalloy DD6 with Multiphase-Field Method and Explicit Nucleation Algorithm

Uncovering the Effect of Mo Addition on the Precipitation Kinetics of the Γ′ Phase in Ni–Al–Mo Model Superalloys Using CALPHAD-assisted Phase-Field Simulations

Phase Stability and Yield Stress of Ni-base Superalloys Containing High Co and Ti

Regulating the Coarsening of the Γ′ Phase in Superalloys

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Site Occupancy of Alloying Elements in Γ′ Phase of Nickel-Base Single Crystal Superalloys