Abstract:Advanced single-crystal superalloys, developed to improve the high temperature capability of gas turbines, often underperform in low-temperature conditions. This limitation compromises the overall reliability of turbine blades under complex service environments. This study introduces a novel strategy to enhance the overall performance of a fourth-generation single-crystal superalloy. Rapid liquid-nitrogen quenching following the aging treatment promotes extensive nucleation of ultrafine γ′ particles (γ′ γ ) with an average size of ∼10 nm, precipitated under extremely low supersaturation, as evidenced by high-resolution transmission electron microscopy (HRTEM) and atom probe tomography investigations. The combination of differential scanning calorimetry analysis, density functional theory calculations, and kinetic models verifies the high stability of γ′ γ particles at low-temperature conditions around 900 °C. HRTEM observations reveal Orowan bypassing and dislocation cutting of γ′ γ particles, leading to additional precipitation hardening by limiting dislocation motion in the γ phase and shear of primary precipitates. Consequently, a bimodal precipitation microstructure comprising γ′ γ particles and primary γ′ phase significantly reduces the strain rate of low-temperature creep and nearly doubles the creep rupture life at 800 °C/735 MPa. Simultaneously, high-temperature properties at 900 °C/392 MPa and 1100 °C/137 MPa remain comparable to those of the original microstructure as the primary γ/γ′ microstructure is minimally affected by rapid cooling. This advancement improves overall performance and redefines the importance of small precipitates, broadening microstructure design concepts for future superalloy development.

Improved 1200 °C Stress Rupture Property of Single Crystal Superalloys by Γ′-Forming Elements Addition

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effects of Alloying Elements on the Microstructure of Precipitation Strengthened Co-based Superalloys

Microstructure and Tensile Behavior of Nickel-Based Single Crystal Superalloys with Different Re Contents

Effects of Zirconium Additions on the Microstructure and Stress-Rupture Properties in Polycrystalline Ni-Based Superalloys

Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature

Adjusting the /<sub>2</sub> and Ti<sub>2</sub>AlC phase on microstructure evolution and improving mechanical properties at room and elevated temperatures with the addition of Ta

The Effect of Tantalum, Tungsten, and Rhenium Additions on the Tensile-Deformation Behavior of Model Nickel-Based Single-Crystal Superalloys at Intermediate Temperature

Effect of Ta Addition on the Microstructure and Tensile Properties of a Ni-Co Base Superalloy

Design for 1200 °C creep properties of Ni-based single crystal superalloys: Effect of γ′-forming elements and its microscopic mechanism

Effects of Ta on microstructural stability and mechanical properties of hot corrosion resistant Ni-based single crystal superalloys during long-term thermal exposure

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys

The Effect of Ta, W, and Re Additions on the Tensile-Deformation Behavior of Model Ni-based Single-Crystal Superalloys at Intermediate Temperature

Microstructure Characteristics and Mechanical Properties of Hf0.5Mo0.5NbTiZr Refractory High Entropy Alloy with Cr Addition

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

Enhancement of tensile properties of Ti2AlNb alloy added with Ta element

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Microstructures' Effects on High Temperature Fatigue Failure Behavior of Typical Superalloys

The Role of In-Situ Al3Ti Formed During Solidification in Improving the High-Temperature Properties of Al-Cu Alloy

New strategy to improve the overall performance of single-crystal superalloys by designing a bimodal γ′ precipitation microstructure