Abstract:In this paper, a novel refractometer based on Mach-Zehnder Interferometer (MZI) is proposed and experimentally investigated. The MZI is composed of 2 micro bending cores (MBCs), one of which excites the cladding modes and the other couples the modes back. This structure is formed by high-frequency CO2 laser polishing and oxyhydrogen flame heating. With the unique deformation method, the interaction between the fiber core and the external status gets enhanced, moreover, higher modes in the cladding are excited, which leads to a high refractive index (RI) sensitivity. Due to the high temperature of the oxyhydrogen flame, the core of CO2 polished fiber is modulated, furthermore, the cladding shape of MBC tends to be circular. Hence, relatively small modulating regions of 500 μm can form for interference. In the experiment, 2 transmission dips are chosen for RI measuring, which possesses the wavelength of 1530.4 nm and 1600.8 nm, respectively. The RI sensitivities of the 2 transmission dips are -271.7 nm/RIU and -333.8 nm/RIU with the RI range of 1.33-1.42. The temperature characteristic is also experimentally analyzed and the temperature sensitivities of which are 0.121 nm/℃ and 0.171 nm/℃ in the range of 34℃-154℃. By solving the matrix equation, the proposed sensor can be applied for simultaneous measurement of RI and temperature.

Fiber Ring Laser Based on SMF–TCF–SMF Structure for Strain and Refractive Index Sensing

Fiber Ring Laser Based on Side-Polished Fiber MZI for Enhancing Refractive Index and Torsion Measurement

Fiber Ring Laser Based on MMF-PMFBG-MMF Filter for Three Parameters Sensing

Erbium-Doped Fiber Ring Laser Based on Few-Mode-Singlemode-Few-Mode Fiber Structure for Refractive Index Measurement

A Precision Refractometer Using Strict Dual-Mode Elliptical Multilayer-Core Fibers with Temperature and Strain Decoupled

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

A Robust High Refractive Index Sensitivity Fiber Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Machining and Chemical Etching

Refractive Index Sensor Based on Fiber Ring Laser

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

Refractometer Based on Fiber Mach-Zehnder Interferometer Composed of Two Micro Bending Cores

Refractive Index Sensing Characterization of A Singlemode-Claddingless-Singlemode Fiber Structure Based Fiber Ring Cavity Laser

Temperature-Insensitive Refractive Index Sensor with Etched Microstructure Fiber.

In-Fiber Mach–Zehnder Interferometer Based on Er Doped Up-Taper and Peanut-Shaped Fiber Structure in Fiber Ring Laser

Optical Fiber Mach-Zehnder Interferometric Strain Sensor Basedon Concatenating Two Micro Cavities Fabricated By A Femtosecond Laser

High-Resolution Strain Fiber Laser-Sensor Based on Core-Offset Mach-Zehnder Interferometer

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Thinned Fiber Based Mach-Zehnder Interferometer for Measurements of Liquid Level and Refractive Index

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

High-Quality Mach-Zehnder Interferometer Based on A Microcavity in Single-Multi-Single Mode Fiber Structure for Refractive Index Sensing

A Dynamic Strain Sensor System Based on a Tunable Fiber Ring Laser

Sensitivity Enhanced Refractive Index Sensor With In-Line Fiber Mach-Zehnder Interferometer Based on Double-Peanut and Er-Doped Fiber Taper Structure