Synthesis of Core–shell SAPO-34@SAPO-18 Composites by the Epitaxial Growth Method and Their Catalytic Properties for the MTO Reaction

Zhiqiang Xu,Jianwen Li,Weixin Qian,Hongfang Ma,Haitao Zhang,Weiyong Ying

DOI: https://doi.org/10.1039/c7ra11395a

IF: 4.036

2017-01-01

RSC Advances

Abstract:A core/shell-structured SAPO-34@SAPO-18 composite catalyst was hydrothermally synthesized through the epitaxial growth method.

What problem does this paper attempt to address?

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Yanping Chen,Yiming Xu,Dang-guo Cheng,Yingcai Chen,Fengqiu Chen,Xiaoyong Lu,Yiping Huang,Songbo Ni

DOI: https://doi.org/10.1515/pac-2013-1121

2014-01-01

Pure and Applied Chemistry

Abstract:AbstractThe present study focuses on synthesis of SAPO-34 zeolite membrane on the surface of CuO–ZnO–Al2O3 (CZA) catalyst particles to form CZA@SAPO-34 core@shell structured catalyst. In contrast to the traditional support of porous alumina, CZA catalyst particles have a relatively brittle surface, which leads to a big challenge to coat SAPO-34 zeolite membrane on their surface. Moreover, the hydrothermal synthesis of SAPO-34 zeolite membrane is carried out under weakly alkaline condition at 200 °C for hours, which causes part of the surface of CZA to be fragmented. To overcome these shortcomings, the intermediate layer of alumina is introduced to the surface of the CZA particles and acts as a barrier to the high-temperature hydrothermal and alkaline condition. It also takes as a transition to enhance SAPO-34 zeolite seeds adherence to the surface of CZA particles. With the help of an alumina layer, a continuous and dense zeolite membrane has been obtained on the surface of CZA particles. The prepared core@shell structured catalyst has better selectivity in CO hydrogenation for producing light hydrocarbons because of the synergetic effects between the membrane and core catalyst.
Core-shell SAPO-34@ZSM-5 composite via in situ solid-solid transformation of pre-coating MCM-41 shell and its application in methanol-to-olefins

Quanhua Wang,Xuchang Wang,Weijiong Dai,Jiajun Zheng,Xiaosen Ma,Yanchao Liu,Lichen Zhang,Bo Qin,Yanze Du,Meng Pan,Yan Wang,Wenlin Li,Binbin Fan,Shuwei Chen,Ruifeng Li

DOI: https://doi.org/10.1016/j.micromeso.2023.112498

IF: 5.876

2023-02-23

Microporous and Mesoporous Materials

Abstract:Hierarchically core-shell-structured composite zeolite was successfully achieved by an in situ solid-solid transformation of a pre-coating MCM-41 shell layer with the help of ZSM-5 seeds under a traditional hydrothermal crystallization route. As a result, a uniform nano-sized polycrystalline ZSM-5 shell closely grows on the core SAPO-34 microsphere, thus forming a desirable core-shell structured zeolite composite. Besides, the SAPO-34 core and the polycrystalline ZSM-5 shell are intimately connected through mesosilica substrates as a "bridge" which guarantees the integrity of the core-shell structure very well, even under harsh ultrasonic treatment at a high frequency. More crucially, this innovative method effectively overcomes the chemical and structural incompatibility between the core crystals and the shell zeolite during synthesis, and simultaneously avoids the collapse and dissolution of SAPO-34 crystals mainly derived from the shielding effect of MCM-41 shell layer under a highly alkaline gel precursor yielding ZSM-5. Furthermore, the methanol-to-olefins (MTO) was selected as a probe reaction so as to investigate the catalytic performance of the core-shell It is found that besides obtaining high light olefins yield (12.3% more than that on the reference catalyst), the catalytic lifetime over core-shell catalyst is greatly improved, about 3 times as long as that over the pristine SAPO-34 and 2.6 times as long as that on the corresponding physically-blended SAPO-34+ZSM-5. The superior catalytic performances on the core-shell can be attributed to the synergetic effects between SAPO-34 (core) and ZSM-5 (shell) including different framework structures, moderate acidic properties, and well-defined hierarchical architectures.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

Quanhua Wang,Weijiong Dai,Yi Dai,Meng Pan,Yanchao Liu,Lichen Zhang,Jiajun Zheng,Xuguang Liu,Ruifeng Li,Luoning Ma,Hu Wang,Yuhao Zong

DOI: https://doi.org/10.1021/acsami.3c19166

IF: 9.5

2024-03-10

ACS Applied Materials & Interfaces

Abstract:It is well known that low-silica SAPO-34, with an extra porosity (meso- and/or macropores) system, affords excellent catalytic performance in the methanol-to-olefins (MTO) reaction, while the direct synthesis of low-silica SAPO-34 with a hierarchical structure is difficult to achieve, principally because the crystal impurities are usually formed under a low silica content in a gel precursor. Herein, low-silica SAPO-34 nanocrystals were successfully fabricated for the first time by constructing...

materials science, multidisciplinary,nanoscience & nanotechnology
Synthesis and application of core-shell zeolite SAPO-34@Silicalite-1

Zong-bei LI,Jian-wen LI,Hai-tao ZHANG,Wei-yong YING

DOI: https://doi.org/10.3969/j.issn.1001-9219.2017.06.001

2017-01-01

Abstract:Core-shell composite SAPO-34@Silicalite-1 with SAPO-34 zeolite as core and Silicalite-1 zeolite as shell was fabricated by the seed secondary growth method. The samples were characterized by XRD, FESEM, NH3-TPD, and N2 adsorption desorption. The catalytic performances of SAPO-34 and SAPO-34@Silicalite-1 zeolite in methanol to olefins (MTO) reaction were evaluated in a fixed-bed reactor. The results showed that compared with SAPO-34, using core-shell zeolite SAPO-34@Silicalite-1 as catalyst, the catalyt life and the selectivities of ethylene and ethylene+propylene increased, and the selectivity of propylene decreased.
Synthesis of ZSM-5/SAPO-34 zeolite composites from LAPONITE® and their catalytic properties in the MTO reaction

Xueshuai Chen,Rongli Jiang,Huilin Hou,Zihan Zhou,Xingwen Wang

DOI: https://doi.org/10.1039/d0ce01002b

IF: 3.756

2020-01-01

CrystEngComm

Abstract:ZSM-5/SAPO-34 zeolite composites were successfully synthesized via a secondary growth method, and the SAPO-34 part of ZSM-5/SAPO-34 was synthesized from LAPONITE®.

chemistry, multidisciplinary,crystallography
SAPO-34 with a Low Acidity Outer Layer by Epitaxial Growth and Its Improved MTO Performance

Chuiyan Kong,Jiang Zhu,Senyuan Liu,Yao Wang

DOI: https://doi.org/10.1039/c7ra06488h

IF: 4.036

2017-01-01

RSC Advances

Abstract:SAPO-34 catalyst with a low acidity outer layer was synthesized by epitaxial growth, and its MTO performance was improved.
Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Pengfei Wu,Dong Fan,Lin Liu,Miao Yang,Peng Tian,Zhongmin Liu

DOI: https://doi.org/10.1016/j.micromeso.2023.112713

IF: 5.876

2023-06-25

Microporous and Mesoporous Materials

Abstract:Synergic regulation of microstructure, morphology and acidity of SAPO-34 molecular sieve is crucial to enhance its catalytic performance for methanol to olefins (MTO) reaction. Herein, a commercial oxygen-containing organosilane 3-glycidoxypropyltrimethoxysilane (AC-230) was developed as a new mesoporogen to synthesize pure SAPO-34 nanocrystallites together with diisopropylamine and seeds. According to the conditional experiments and systematic characterizations, it was disclosed that AC-230 not only changed the morphology and particle size of the SAPO-34 crystals but also affected its compositions and acidic properties. The addition of seed was indispensable to fasten the crystallization rate and hence assure the crystal growth inhibition function of AC-230. Thanks to the formed shortened diffusion pathway, moderate acid sites and pure CHA structure of the nanosized SAPO-34 product, the catalyst demonstrates excellent catalytic performance with a longer lifetime (395 min) and higher ethylene plus propylene selectivity (82.88%) in comparison to its conventional analogs (259 min and 80.63%).

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
One‐Step Synthesis of Hybrid Core–Shell Metal–Organic Frameworks

Xinyu Yang,Shuai Yuan,Lanfang Zou,Hannah Drake,Yingmu Zhang,Junsheng Qin,Ali Alsalme,Hong-Cai Zhou

DOI: https://doi.org/10.1002/anie.201710019

2018-01-01

Angewandte Chemie

Abstract:Epitaxial growth of MOF-on-MOF composite is an evolving research topic in the quest for multifunctional materials. In previously reported methods, the core-shell MOFs were synthesized via a stepwise strategy that involved growing the shell-MOFs on top of the preformed core-MOFs with matched lattice parameters. However, the inconvenient stepwise synthesis and the strict lattice-matching requirement have limited the preparation of core-shell MOFs. Herein, we demonstrate that hybrid core-shell MOFs with mismatching lattices can be synthesized under the guidance of nucleation kinetic analysis. A series of MOF composites with mesoporous core and microporous shell were constructed and characterized by optical microscopy, powder X-ray diffraction, gas sorption measurement, and scanning electron microscopy. Isoreticular expansion of microporous shells and orthogonal modification of the core was realized to produce multifunctional MOF composites, which acted as size selective catalysts for olefin epoxidation with high activity and selectivity.
A rapid and eco-friendly approach for the synthesis of low-silica SAPO-34 with excellent MTO catalytic performance

Xiaoxia Zou,Dong Fan,Xiaosi Zhang,Caiyi Lou,Miao Yang,Shutao Xu,Quanyi Wang,Peng Tian,Zhongmin Liu

DOI: https://doi.org/10.1039/d4cc01017e

IF: 4.9

2024-01-01

Chemical Communications

Abstract:A rapid and eco-friendly route has been developed for synthesizing SAPO-34 with short crystallization time, low silica content and excellent MTO catalytic performance by utilizing a recycled mother liquid at elevated crystallization temperature.

chemistry, multidisciplinary
Affecting the Formation of the Micro‐structure and Meso/macro‐structure of SAPO‐34 Zeolite by Amphipathic Molecules

Xuefeng Shen,Yujue Du,Jiajia Ding,Chuanming Wang,Hongxing Liu,Weimin Yang,Zaiku Xie

DOI: https://doi.org/10.1002/cctc.202000794

IF: 4.5

2020-01-01

ChemCatChem

Abstract:SAPO‐34 is an important member in the family of zeolites, which shows excellent catalytic activity in MTO reaction, but suffers from the diffusion bottleneck. To overcome the diffusion problem, porogen was added to generate meso/macro pores in SAPO‐34 zeolite. In this work, amphipathic molecules were designed as CSDA to synthesize a tri‐level hierarchically porous SAPO‐34, and the introduction of CSDA could promote the Si atoms incorporating into the AlPO4 framework, change the morphology of particles and decrease the acidity of prepared SAPO‐34 zeolite. The prepared SAPO‐34 catalyst exhibits higher selectivity of C2H4 and C3H6 in the MTO reaction than the conventional SAPO‐34 zeolite. The morphology and the microstructure of the prepared samples vary with the carbon chain of the amphipathic molecules due to the matching between amphipathic molecules and topological structure of CHA.
Seed-assisted synthesis of hierarchical SAPO-18/34 intergrowth and SAPO-34 zeolites and their catalytic performance for the methanol-to-olefin reaction

Chao Sun,Yaquan Wang,Hengbao Chen,Xiao Wang,Cui Wang,Xu Zhang

DOI: https://doi.org/10.1016/j.cattod.2019.04.038

IF: 5.3

2020-09-01

Catalysis Today

Abstract:<h2>Abstract</h2><p>Hierarchical silicoaluminophosphate SAPO-18/34 intergrowth and SAPO-34 zeolites were synthesized by adding SAPO-34 seed crystals to a SAPO-18 zeolite precursor in an aminothermal system, in which triethylamine was used as both the solvent and the template. The prepared samples were characterized by XRD, SEM, TEM, ICP-OES, N<sub>2</sub> adsorption-desorption, NMR, TPD, TGA and GC-MS and a possible formation mechanism was proposed. The XRD and NMR results indicated that as the amount of SAPO-34 seed crystals increased, the phase of the products changed from SAPO-18 to SAPO-18/34 intergrowth and then to pure-phase SAPO-34. SEM and TEM results showed that the SAPO samples are the aggregates of many nanosized plate-like nanoparticles containing mesopores and/or macropores. These samples had higher external surface areas and mesopore volumes than the single-phase SAPO-18. The NH<sub>3</sub>-TPD results showed that the amount and strength of the strong acid sites in the SAPO-18/34 intergrowth and SAPO-34 samples were influenced by the amount of added SAPO-34 seed crystals, but all values were higher than those of pure SAPO-18. The SAPO-18/34 intergrowth and SAPO-34 zeolites with the hierarchical structure and appropriate acidic properties exhibted excellent catalytic properties for the methanol to olefin reaction. Moreover, the selectivities of light olefins varied with the cage type, the acidic properties and hierarchical structure of SAPO-18/34 intergrowth and SAPO-34 zeolites.</p>

chemistry, physical,engineering, chemical, applied
Ingrown Leading to Hierarchical SAPO‐34 with High Catalytic Activity

Xuefeng Shen,Jiajia Ding,Yingchun Ye,Hongxing Liu,Zaiku Xie

DOI: https://doi.org/10.1002/cmtd.202400027

2024-01-01

Abstract:AbstractIntroduce meso/macro‐pore to the crystal of SAPO‐34 is an efficient way to overcome its inherent diffusion resistance. Porogen, formation hierarchical structure by inhibiting the growth of the crystals, would increase the costs of SAPO‐34 and is usually not friendly to environment. In this work, an ingrowth route to synthesize hierarchical SAPO‐34 is developed by secondary silica addition via hydrothermal method. Hierarchical porous SAPO‐34 was synthesized without adding any pore‐generating agent. Secondary silica addition put off the Si and P transferring from the mother liquid to gel phase, leading to the chemical composition of surface first meeting to the crystallization conditions. Then the crystallization started from the surface to the inside of the amorphous particles. The hierarchical SAPO‐34 showed numerous meso/macro pore structure and weaker acid strength. So the hierarchical SAPO‐34 showed better catalytic activity than the conventional SAPO‐34 in MTO reaction.
Synthesis of a multinanoparticle-embedded core/mesoporous silica shell structure as a durable heterogeneous catalyst.

Lijun Wang,Jianlin Shi,Yan Zhu,Qianjun He,Huaiyong Xing,Jian Zhou,Feng Chen,Yu Chen

DOI: https://doi.org/10.1021/la2045898

IF: 3.9

2012-01-01

Langmuir

Abstract:A multi-nanoparticle-embedded amorphous aluminum/magnesium oxides (AAMO) core/mesoporous silica (mSiO(2)) shell structure has been successfully synthesized by calcining the presynthesized catalyst precursor-containing layered double hydroxide (LDH) core/mesoporous silica shell composite. The well-dispersed catalytic nanoparticles were fixed at the interface between AAMO core and mesoporous SiO2 shell, i.e., at the inner pore mouths of the mesoporous SiO2 shell, which could effectively prevent nanoparticles from growth and/or aggregation with each other and in the meantime allow efficient access of reactants to the catalytic NPs. The final core/shell composite was found to be an efficient and highly recyclable heterogeneous catalyst.
Engineering a CoMnO x nanocube core catalyst through epitaxial growth of CoAlO x hydrotalcite shell nanosheets for efficient elimination of propane

Shixing Wu,Shilin Wu,Fang Dong,Siyi Ma,Yu Meng,Haitao Zhang,Zhicheng Tang

DOI: https://doi.org/10.1039/d4ta03015j

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:In this work, we successfully designed a core–shell structured CoMnO x @Co x Al 1 catalyst for the catalytic combustion of propane (C 3 H 8 ).

materials science, multidisciplinary,chemistry, physical,energy & fuels
Facile surfactant-assisted synthesis of nanosheet-like mesoporous SAPO-34 zeolites and catalysis performance for methanol to olefins

Yongyong Nan,Shizi Ma,Fei Zha,Haifeng Tian,Xiaohua Tang,Yue Chang,Xiaojun Guo

DOI: https://doi.org/10.1007/s11144-022-02233-7

2022-06-17

Abstract:Nanosheet-liked mesoporous SAPO-34 zeolites were synthesized by a facile surfactant-assisted hydrothermal synthesis method. Compositions, morphology, acidities, chemical environment and texture properties of SAPO-34 zeolites synthesized were characterized by XRD, SEM, TEM, AFM, NH 3 -TPD, N 2 adsorption–desorption, XPS, and TG measurements. The morphology and the surface acid density of SAPO-34 zeolite can be controlled by adding of cetyltrimethylammonium bromide (CTAB) and using triethanolamine (TEA) as the template. The nanosheet-liked mesoporous SAPO-34 zeolites have lower amount of strong acid strongth with the thickness of about 3.0 nm. The catalysis performance for methanol-to-olefin (MTO) over nanosheet-like SAPO-34 zeolites was systematically studied. Under the condition of temperature at 400 °C, feeding WHSV of 2.0 h −1 , catalyst mass of 0.2 g and at atmospheric pressure, the methanol conversion is nearly 100% and the light olefins selectivity is 97.35%. As nanosheet-like SAPO-34 zeolites shorten the diffusion path and enhance the mass flow to and away from the catalytic centers, the catalyst lifetime is more than 420 min.
Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system

Ni Liang,Haiyan Wang,Yujia Wang,Lei Kang,Yingzhi Bai,Na Sun

DOI: https://doi.org/10.1007/s10934-024-01614-8

2024-04-29

Journal of Porous Materials

Abstract:A strategy was devised for the synthesis of SAPO-34, which involved a concentrated gel system-assisted two-step crystallization method. This strategy effectively controlled the size and morphology of SAPO-34. The successful synthesis of SAPO-34 crystals with micron-scale cubic morphology and nano-scale sheets were achieved using triethylamine as a low-cost template. The paper thoroughly examined the growth evolution that occurs during the crystallization process, and it delved into the factors such as gel concentration and crystallization conditions in the synthesis. Furthermore, potential theories regarding nucleation and growth mechanisms were suggested. A systematic study was conducted to examine how the morphology and acidity of SAPO-34 zeolites impact their catalytic performance. The results confirmed that the SAPO-34 with low silicon content and lamellar structure was successfully synthesized through a two-step crystallization within a gel system of H 2 O/Al 2 O 3 = 30, with a thickness of approximately 50–300 nm. SAPO-34 nanosheets demonstrated a substantial enhancement in catalytic performance, with a catalytic life of 370 min and an 84.1% selectivity towards light olefins.

materials science, multidisciplinary,chemistry, physical, applied
Sustainable Synthesis of Core-shell Structured ZSM-5@Silicalite-1 Zeolite

Luan Huimin,Wu Qinming,Zhang Jian,Wang Yeqing,Meng Xiangju,Xiao Feng-Shou

DOI: https://doi.org/10.1007/s40242-021-1288-y

IF: 3.1

2021-01-01

Chemical Research in Chinese Universities

Abstract:C ore-shell structured ZSM-5@Silicalite-1 zeolite could effectively hinder the deactivation of catalyst surface. Currently, organic structure directing agents(OSDAs) are necessary in the conventional route for the synthesis of this core-shell zeolite under hydrothermal conditions, which is costly and environmental-unfriendly. In this research, a synthesis of the core-shell structured ZSM-5@Silicalite-1 zeolite with a strategy of alcohol filling and zeolite seeding without any organic template or solvent is exhibited. The obtained products are well characterized by X-ray powder diffractometer(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), N 2 sorption isotherms, solid magic angle spinning(MAS) NMR, temperature-programmed-desorption of ammonia(NH 3 -TPD), and X-ray photoelectron spectroscopy(XPS) techniques, in order to confirm the core-shell structure. More importantly, the core-shell structured ZSM-5@Silicalite-1 zeolite exhibits a long lifetime and a high p -xylene selectivity in the alkylation of toluene with methanol, compared with the conventional ZSM-5 catalyst.
Hierarchical Low-Silica SAPO-34 with Enhanced MTO Performance: Mesopore Template- and Fluoride-Free Synthesis

Shuo Tao,Xiangyu Zhang,Xue Li,Yujie Wang,Bo Wang,Yangyang Yuan,Dengqiang Zhang,Songrui Du,Xiaolei Li

DOI: https://doi.org/10.1016/j.micromeso.2022.112425

2022-01-01

SSRN Electronic Journal

Abstract:The inherent mass transport limitations and undesired acidity of silicoaluminophosphate SAPO-34 catalysts are two key factors that result in a fast deactivation rate in the methanol-to-olefin (MTO) reaction. Herein, we demonstrate that SAPO-34 with hierarchical pore architecture and different silicon contents can be rationally synthesized by hydrothermal treatment of homogeneous amorphous silicoaluminophosphate precursors in the absence of mesopore templates and fluoride. It reveals that the hierarchical architecture is formed by in situ alkaline TEAOH etching of framework atoms. The silicon content (acidity) of the products can be facilely tuned in wide range. 29Si MAS NMR spectra reveal silicon mainly exists in the form of Si(4Al) in low-silica SAPO-34 catalysts free from silica islands. The hierarchical SAPO-34 catalyst with a moderate silicon content (nSi/n(Si + Al + P) = 0.048) and small particle size (265 +/- 94 nm) exhibits a prolonged catalytic lifetime as well as a higher selectivity in MTO reaction, attributing to the synergetic effect of a fast diffusion speed and an appropriate acidic density.
Synthesis and Applications of SAPO‐34 Molecular Sieves

Wenhe Yu,Xiaowen Wu,Bohao Cheng,Tao Tang,Xin Min,Ruiyu Mi,Zhaohui Huang,Minghao Fang,Yangai Liu

DOI: https://doi.org/10.1002/chem.202102787

2021-01-01

Chemistry

Abstract:Silicoaluminophosphate zeolite (SAPO-34) has been attracting increasing attention due to its excellent form selection and controllability in the chemical industry, as well as being one of the best industrial catalysts for methanol-to-olefin (MTO) reaction conversion. However, as a microporous molecular sieve, SAPO-34 easily generates carbon deposition and rapidly becomes inactivated. Therefore, it is necessary to reduce the crystal size of the zeolite or to introduce secondary macropores into the zeolite crystal to form a hierarchical structure in order to improve the catalytic effect. In this review, the synthesis methods of conventional SAPO-34 molecular sieves, hierarchical SAPO-34 molecular sieves and nanosized SAPO-34 molecular sieves are introduced, and the properties of the synthesized SAPO-34 molecular sieves are described, including the phase, morphology, pore structure, acid source, and catalytic performance, in particular with respect to the synthesis of hierarchical SAPO-34 molecular sieves. We hope that the review can provide guidance to the preparation of the SAPO-34 catalysts, and stimulate the future development of high-performance hierarchical SAPO-34 catalysts to meet the growing demands of the material and chemical industries.
Synthesis of SAPO-34 with Small and Tunable Crystallite Size by Two-Step Hydrothermal Crystallization and Its Catalytic Performance for MTO Reaction

Pengfei Wang,Dexing Yang,Jie Hu,Jing'an Xu,Guanzhong Lu

DOI: https://doi.org/10.1016/j.cattod.2012.08.027

IF: 5.3

2013-01-01

Catalysis Today

Abstract:SAPO-34 crystallites with 160–550nm were synthesized by a two-step hydrothermal crystallization and characterized by XRD, SEM, XRF, low-temperature N2 adsorption and NH3-TPD. The H2O2 aqueous solution was used to remove template. The size effects of SAPO-34 crystallites on its catalytic performance (the catalytic activity, lifetime and coking formation) were investigated for the conversion of methanol to olefins (MTO). Comparing with SAPO-34 sample (I) prepared by traditional one-step hydrothermal crystallization, the sample (II) prepared by a two-step hydrothermal crystallization possesses the similar CHA structure, cubic-like rhombohedra morphology, chemical composition and Si environment as sample (I); however, the sample (II) has smaller crystallite (160nm), larger surface area (648m2/g) and more acid sites than the sample (I) (1100nm, 498m2/g). For the MTO reaction, the olefins selectivity and lifetime strongly depend on the crystallite sizes of SAPO-34 catalyst, and the smaller the crystallite sizes of SAPO-34 and the better its catalytic performance is. Using the catalyst (II), the olefins selectivity and lifetime in single run can reach more than 94.9% and 10h, respectively. Therefore, this two-step hydrothermal crystallization developed here offers a promising strategy to control the crystallite size of SAPO-34, and SAPO-34 with small crystallite size is an excellent candidate of catalyst for MTO process.

Synthesis of Core–shell SAPO-34@SAPO-18 Composites by the Epitaxial Growth Method and Their Catalytic Properties for the MTO Reaction

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

Core-shell SAPO-34@ZSM-5 composite via in situ solid-solid transformation of pre-coating MCM-41 shell and its application in methanol-to-olefins

Design Synthesis of Low-Silica SAPO-34 Nanocrystals by Constructing Isomorphous Core-Shell Structure: An Effective Catalyst for Improving Catalytic Performances in Methanol-to-Olefins Reaction

Synthesis and application of core-shell zeolite SAPO-34@Silicalite-1

Synthesis of ZSM-5/SAPO-34 zeolite composites from LAPONITE® and their catalytic properties in the MTO reaction

SAPO-34 with a Low Acidity Outer Layer by Epitaxial Growth and Its Improved MTO Performance

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

One‐Step Synthesis of Hybrid Core–Shell Metal–Organic Frameworks

A rapid and eco-friendly approach for the synthesis of low-silica SAPO-34 with excellent MTO catalytic performance

Affecting the Formation of the Micro‐structure and Meso/macro‐structure of SAPO‐34 Zeolite by Amphipathic Molecules

Seed-assisted synthesis of hierarchical SAPO-18/34 intergrowth and SAPO-34 zeolites and their catalytic performance for the methanol-to-olefin reaction

Ingrown Leading to Hierarchical SAPO‐34 with High Catalytic Activity

Synthesis of a multinanoparticle-embedded core/mesoporous silica shell structure as a durable heterogeneous catalyst.

Engineering a CoMnO x nanocube core catalyst through epitaxial growth of CoAlO x hydrotalcite shell nanosheets for efficient elimination of propane

Facile surfactant-assisted synthesis of nanosheet-like mesoporous SAPO-34 zeolites and catalysis performance for methanol to olefins

Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system

Sustainable Synthesis of Core-shell Structured ZSM-5@Silicalite-1 Zeolite

Hierarchical Low-Silica SAPO-34 with Enhanced MTO Performance: Mesopore Template- and Fluoride-Free Synthesis

Synthesis and Applications of SAPO‐34 Molecular Sieves

Synthesis of SAPO-34 with Small and Tunable Crystallite Size by Two-Step Hydrothermal Crystallization and Its Catalytic Performance for MTO Reaction