Abstract:Dual-comb spectroscopy has enabled new approaches for optical precision measurements. Although Doppler-limited resolution can be achieved over long-time scales across a large bandwidth, the development of dual-comb spectroscopy is hindered by strict demands for light source stability. Typically, expensive and complex self-reference systems are required to lock the carrier-envelope offset frequency (fceo) of the laser. Additionally, simply locking the repetition frequency (frep) to a radio frequency reference source still results in residual relative timing jitter between light sources. Here we extracted the relative fceo fluctuation between the frep-locked lasers from the high-precision passive notch filtering characteristics of the phase-shifted fiber Bragg grating and then eliminated it through online phase calibration. By introducing a passive broadband Fabry–Perot cavity with excellent thermal wavelength stability, we subsequently corrected residual relative timing jitter with online wavelength calibration, and the standard deviation of the relative wavelength drift was reduced to less than 0.4 pm within the full operating range. The spectral profile can also be extracted and removed by the Fabry–Perot cavity through intensity calibration. By calibrating these three dimensions, we built a reference-free post-calibration dual-comb spectroscopy and used this powerful tool to measure the Fabry–Perot cavity resonance peaks, the notch filtering narrow band of phase-shifted fiber Bragg gratings, and the absorption characteristics of hydrogen cyanide gas. The system achieves a spectral resolution of 0.8 pm over a bandwidth of more than 100 nm. This low-cost and convenient scheme provides new ideas for the application of dual-comb spectroscopy systems.

Instant Laser Wavelength Measurement Based on Dual Fabry–Pérot Etalons

Self-Enclosed All-Fiber In-Line Etalon

All Fiber Real-Time Laser Wavelength Measurement Method Based on Faraday Rotation Effect

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

All-fiber Laser Wavelength Measurement System Based on Two Quadrature Faraday Rotation Devices

A Method of Measuring Fabry-Parot Etalon Transmittance by Using Frequency Comb Laser

In-line fiber-optic etalon formed by hollow-core photonic crystal fiber

Photonic Instantaneous Measurement of Microwave Frequency Using Fiber Bragg Grating

Photonic comb: a stabilized single-mode fiber etalon for wavelength calibration

Ultrafast and Wideband Optical Vector Analyzer Based on Optical Dual Linear-Frequency Modulation

Fast Dual-Comb Spectroscopy Based on a Dual-Wavelength All-Fiber Ring Laser with High Repetition Rate

Miniature In-Line Photonic Crystal Fiber Etalon Fabricated by 157 Nm Laser Micromachining

Fabry–Pérot based short pulsed laser linewidth measurement with enhanced spectral resolution

A reference-free dual-comb spectroscopy calibrated by passive devices

Self-Enclosed All-Fiber In-Line Etalon Strain Sensor Micromachined by 157-nm Laser Pulses

High-resolution Absolute Distance Measurement Using a Dual-Wavelength, Dual-Comb, Femtosecond Fiber Laser

A Low-Cost and Fast Wavelength Measurement Method Based on Faraday Rotation Effect

Discretely Tunable Single- And Dual-Wavelength Fiber Ring Laser Using A Fiber Bragg Gratings Based Fabry-Perot Filter

Dual Wavelength Differential Detection of Fiber Bragg Grating Sensors with a Pulsed DFB Laser

Optical Measurement by a Dual-Frequency Comb Based on Rayleigh Scattered Stokes Light

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing