Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

More Accurate Modulus Back-Calculation by Reducing Noise Information from in Situ–measured Asphalt Pavement Deflection Basin Using Regression Model

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Development of an Artificial Neural Network-Based K-Value Prediction Model to Improve the Sensitivity of Base Layer on Rigid Pavement Performance

Parametric Study of Modified Subgrade Reaction Model Using Artificial Neural Network Approach

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Determination of Complex Modulus Gradients of Flexible Pavements Using Falling Weight Deflectometer and Artificial Intelligence

Automatic Inverse Analysis of Asphalt Pavement Field Aging Based on System Identification

Kinetics-based Aging Prediction of Asphalt Mixtures Using Field Deflection Data

Asphalt pavement modulus backcalculation using surface deflections under moving loads

Modeling and validation of impact forces for back‐calculation of pavement surface moduli

Toward Asphalt Pavement Health Monitoring with Built-In Sensors: A Novel Application to Real-Time Modulus Evaluation

Surface Deflection-Based Reliability Analysis of Asphalt Pavement Design

Effect of nonlinear stress-dependency and cross-anisotropy on the backcalculation outputs from the TSD deflection slopes and the effect on estimated pavement performance

Monitoring the Structural Capacity of Airfield Pavement with Built-in Sensors and Modulus Back-Calculation Algorithm

Real-time Assessment of Asphalt Pavement Moduli and Traffic Loads Using Monitoring Data from Built-in Sensors: Optimal Sensor Placement and Identification Algorithm

System Identification Method for Evaluating the Effect of Thickness Error on Backcalculated Pavement Layer Moduli

Assessing artificial neural network performance for predicting interlayer conditions and layer modulus of multi-layered flexible pavement