Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Interdigitated crystalline MMT‐MCA: Preparation and characterization

Triglycidyl Para -Aminophenol Modified Montmorillonites for Epoxy Nanocomposites and Multi-Scale Carbon Fiber Reinforced Composites with Superior Mechanical Properties

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Exfoliated PS/MMT nanocomposites prepared by emulsion polymerization

Polymer/MMT nano-composite coatings formed by colloidal packing and their properties

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Dielectric Behaviour of Montmorillonite/cyanoethylated Cellulose Nanocomposites.

Crystallization Behavior and Morphology of Novel Aliphatic Poly (Monothiocarbonate)s

Preparation of Poly (methyl Methacrylate)/nanometer Calcium Carbonate Composite by In-Situ Emulsion Polymerization

Preparation and Application of a New Type of Membrane Materials of Poly(Methyl Methacrylate-co-Acrylic Acid)/Montmorillonite

Reversible Addition‐Fragmentation Transfer Polymerization in the Presence of MMT Immobilized Amphoteric RAFT Agent

Preparation of PMMA-AA/MMT Nanocomposite Pervaporation Membrane for Separating Xylene Isomers

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and Properties of Pu/Mcmmt Nanocomposites

Liquid-crystalline copolyester/clay nanocomposites

Preparation and Characterization of Polyamide 66/montmorillonite Nanocomposites with Methyl Methacrylate As Cointercalation Agent

Synthesis and Characterization of PMMA/Organomodified Montmorillonite Nanocomposites Prepared by in Situ Bulk Polymerization

Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites

Stiff and tough PDMS-MMT layered nanocomposites visualized by AIE luminogens

A Novel Method for Manufacturing High‐Performance Layered Silicate/Epoxy Nanocomposites Using an Epoxy–Diamine Adduct to Enhance Compatibility and Interfacial Reactivity