Abstract:For high transparent materials, the difference among the transmittances of various slabs in different thicknesses is very slight since the index of absorption is rather small. However, the divergence of transmittances is very necessary to provide multiple independent constraints for retrieving spectral intrinsic properties from transmitted data with an acceptable accuracy. A Multi-Layer-Combination (MLC) method in which multiple sheets compose a transmitted combination is proposed to provide obviously different transmittances. In this study, the measurements on MLC slabs of C-plane sapphire were performed between 0.8 and 7.0 mu m from room temperature to 1800 K. For a given total thickness, the measured results show that the stacking structure of multiple layers can obviously diminish the transmittance, but has no influence on the infrared cutoff and infrared border of high transparency. The spectral refractive indexes and absorption indices within 0.8-5 mu m were extracted from transmittance data by minimizing the standard deviation between measurements and predictions. The results indicate that all the properties are wavelength dependent and temperature dependent. Spectral refractive indexes rise regularly with growing temperature and decrease slowly with increasing wavelength. For a researched temperature, the index of absorption levels off in the high transparent interval and climbs steadily in the next spectrum as the wavelength increases. In the tested temperature range of 300-1800 K, the spectral absorption indices rise gradually with increasing temperature. The absorption edge moves forward to the short wavelength infrared from about 3.5 mu m at 300 K to about 2.75 mu m at 1800 K. (C) 2018 Elsevier Ltd. All rights reserved.

Spectral Properties of an UV Fused Silica Within 0.8 to 5 Μm at Elevated Temperatures

Multi-Angle Method to Retrieve Infrared Spectral Properties of a High-Transparency Material at High Temperatures

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Experimental investigation on spectral thermal radiation properties of optical quartz at high-temperature

In Situ Ftir Investigations at Varying Temperatures on Hydrous Components in Rutile

Observation of Temperature Dependence of the IR Hydroxyl Absorption Bands in Silica Optical Fiber

Oh in Natural Orthopyroxene: an in Situ Ftir Investigation at Varying Temperatures

Thermally Induced Emission from Hydroxyl Groups in Fused Silica Optical Fibers

Measurement of Si―OH Content in Fused Silica with Extended Dynamic Range by Fourier Transf Orm Infrared Spectroscopy

Identification of the spectral complex refractive indices of micrometric phases within a semi-transparent medium up to elevated temperatures

Optical properties of sapphire fiber under high temperature

Measurements of spectral emissivity, reflectance and transmittance at high temperatures using laser heating and auxiliary light source

Theoretical and Experimental Investigations on the Temperature Dependence of the Refractive Index of Amorphous Silica

Preventing overfitting in infrared ellipsometry using temperature dependence: fused silica as a case study

Temperature Dependence of Ir Absorption of Oh Species in Clinopyroxene

Evolution of Oh Groups in Diopside and Feldspars with Temperature

Radiative properties characterization of ZrB2–SiC-based ultrahigh temperature ceramic at high temperature

Temperature-Dependent Thermal Conductivity and Absorption Coefficient Identification of Quartz Window Up to 1100 K

Calculate Ir Optical Constants of Si Substrate under High Temperature Condition

Multi-layer-combination Method to Retrieve High-Temperature Spectral Properties of C-plane Sapphire

High-temperature Sensor Based on Resonant Reflection in Hollow Core Fiber