Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

Cyclic Softening Behaviors of Modified 9–12%cr Steel under Different Loading Modes: Role of Loading Levels

Cyclic Behavior of 9–12% Cr Steel under Different Control Modes in Low Cycle Regime: A Comparative Study

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Effect of Cyclic Loadings on Stress Relaxation Behaviors of 9–12%cr Steel at High Temperature

Uniaxial Mean Stress Relaxation of 9–12% Cr Steel at High Temperature: Experiments and Viscoplastic Constitutive Modeling

Interaction of Cyclic Softening and Stress Relaxation of 9–12% Cr Steel under Strain-Controlled Fatigue-Creep Condition: Experimental and Modeling

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Low Cycle Fatigue of 9-12% Cr Steel at Elevated Temperature: Cyclic Deformation Behavior and Life Assessment

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

A Physically-Based Model of Cyclic Responses for Martensitic Steels with the Hierarchical Lath Structure under Different Loading Modes

Cyclic deformation behaviors and microstructure evolution mechanisms of 42CrMo steels under different heat-treatment states

Influence of Strain Amplitude on Low-Cycle Fatigue Behaviors of a Fourth-Generation Ni-Based Single-Crystal Superalloy at 980 °C

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

Non-saturated Cyclic Softening and Uniaxial Ratcheting of a High-Strength Steel: Experiments and Viscoplastic Constitutive Modeling

The cyclic response behavior, failure mechanism, and life prediction model of 9% Cr‐based steel under different strain ratios in the low cyclic fatigue regime at 430°C

Cyclic stress response and microcrack initiation mechanism of modified 9Cr‐1Mo steel under low cycle fatigue at room temperature and 350°C

Creep-fatigue interaction and damage behavior in 9-12%Cr steel under stress-controlled cycling at elevated temperature: Effects of holding time and loading rate

Low Cycle Fatigue Behavior of Original Ferritic P92 Steel at High Temperature: Experiments and Simulations

Cyclic softening behavior of structural steel with strain range dependence

Effect of loading history on strain behavior and life in Sanicro25 alloy under multi-step cyclic loading at 700 °C