Abstract:Motivated by increasing demands on high-quality measurement of interior magnetic field in tokamak plasma, a far-infrared laser-based polarimeter-interferometer system has been developed on J-TEXT. Three formic acid lasers separately pumped by three CO2 lasers are used as sources, providing more than 90 mW output power in total. High laser power along with usage of newly developed planar Schottky diode mixer enable high phase resolution < 1 mrad. Collinearity and polarization calibrations have been carefully done to improve the measurement reliability. Meanwhile, real-time feedback control of three-wave laser source has been realized for the first time, to fulfill the system stability. Based on three-wave technique, Faraday angle and integrated density phase along the laser path are simultaneously measured with high temporal resolution. In addition, the laser beam is expanded to cover the entire cross-section of the plasma to provide high spatial resolution measurement. With this system, MHD equilibrium of the J-TEXT plasma has been reconstructed. Obscure perturbations on magnetic topology and electron density associated with MHD instabilities, e.g. sawteeth and tearing modes have also been observed. In particular, some interesting features of disruptions in high-density discharges are identified by carefully interpreting the measured polarimeter-interferometer data. In the density ramp-up phase of a high density discharge, asymmetry in both electron density and current density profiles between the Low-Field-Side (LFS) edge (r > 0.8a) and the High-Field-Side (HFS) edge (r < −0.8a) would appear and extend gradually toward the center region. At the same time, a low-frequency (< 1 kHz) density perturbation suddenly occurs at the HFS edge and also gradually propagates into the center region. The disruption takes place when the electron density asymmetry/perturbation reaches the location nearly the m/n = 2/1 (where m and n are the toroidal mode number and the poloidal one, respectively) resonant surface. Evolution of the reconstructed electron density and current density profiles present the details on the asymmetrical behaviors and provide a possible explanation for the high density disruption.

The Measurement of Plasma-Facing Materials’ Topography Variation by Means of Temporal Phase-Shifting Speckle Interferometry Technique

Surface Topography Measurement of Plasma-Facing Materials by Dual-Wavelength Phase-Shifting Speckle Interferometry Technique

Measurement of the Deposition Morphology Using Temporal Phase-Shifting Laser Speckle Interferometry

3-D Surface Morphology Measurement of Plasma-Facing Materials Using Laser Speckle Interferometry in Presence of Periodic Vibration

Diagnosis of the Surface Morphology of Laser-Ablated Materials Using the Weighted-Dct Approach in Laser Speckle Interferometry for Application to Plasma Facing Materials

A Dynamic Monitoring Approach For The Surface Morphology Evolution Measurement Of Plasma Facing Components By Means Of Speckle Interferometry

A laser interferometric measurement on the melt film thickness during close-contact melting on an isothermally-heated horizontal plate

An Improved Approach to Eliminate the Error Induced by Vibrations for Laser Speckle Interferometry under Tokamak Vibrational Environments

3D Surface Morphology Measurement Using Improved Laser Speckle Interferometry in Presence of White Light Background

High Spatial Resolution Mapping of Deposition Layers on Plasma Facing Materials by Laser Ablation Microprobe Time-of-flight Mass Spectroscopy

Diagnosis of the periodic vibration using laser interferometry

In situ measurement of MEMS topography based on phase-shifting interferometry

An Approach for Measurement of the Magnetic Field Near the Surface of Plasma-Facing Components in Tokamak by Laser Induced Breakdown Spectroscopy Based on Zeeman Effect

Evaluation of a laser speckle interferometry-based diagnostic system for wall surface variation in tokamak device

The Three-Wave Laser Polarimeter-Interferometer on J-TEXT Tokamak

In-Situ 3d Shape Measurement System for High-Temperature Object in Plasma Wind Tunnel Via Dmd-Projecting Laser Structured Light and Adaptive Speckle Filtering

Development Of An In Situ Diagnostic System For Mapping The Deposition Distribution On Plasma Facing Components Of The Hl-2m Tokamak

In Situ Multi-Perspective Scanning of 3D Particle Deposition on Flat Plates with Film Cooling and Determination of Practical Model Parameters

Evaluation of a Novel Femtosecond Laser Ablation System for In Situ Analysis Based on Two-Dimensional Galvanometer Scanners

Comparison of phase unwrapping algorithms for topography reconstruction based on digital speckle pattern interferometry

Far-forward Collective Scattering Measurements by FIR Polarimeter-Interferometer on J-TEXT Tokamak.