Abstract:In this article, we demonstrate great potential of lightly-erbium(Er 3+ )-doped ZrF 4 fiber in efficient power scaling at ∼2.8 μm, when excited at ∼1.7 μm. Core-pumped by a random Raman fiber laser at 1.69 μm, the 1.5 mol.% Er 3+ -doped ZrF 4 fiber in a F-P cavity has experimentally yielded an output power of >6 W at 2.783 μm with a slope efficiency of up to 58.4% (with respect to the absorbed pump), close to its Stokes limit of 60.7% (1.69/2.783). To our knowledge, this is the highest efficiency of Er 3+ -doped ZrF 4 fiber lasers in the mid-infrared. Further power scaling is only limited by the current pump power. Based on the validated numerical model, the dominant role of the excited state absorption (ESA) process (i.e., $^4{\mathrm{I}}_{13/2}{ \to }^4{\mathrm{I}}_{9/2}$ ) in exciting efficient ∼2.8 μm laser has been highlighted, and the resonant ground state absorption process (i.e., $^4{\mathrm{I}}_{15/2}{ \to }^4{\mathrm{I}}_{13/2}$ ) is also essential. The simulation results indicate that the pump wavelength closer to the ESA peak can yield a higher slope efficiency. In addition, heat load analyses via numerical modeling reveals that the $^4{\mathrm{I}}_{9/2}{ \to }^4{\mathrm{I}}_{11/2}$ multiphonon relaxation is the main heat source of the system. By taking fiber optical damage limit into account simultaneously, a high-power lightly-Er 3+ -doped ZrF 4 fiber laser arrangement has been proposed, which theoretically enables 100-W-class output under a slope efficiency of >50% and a relatively low heat load.

1.5 Μm Low Threshold, High Efficiency Random Fiber Laser with Hybrid Erbium–Raman Gain

1.5 Μm Low Threshold, High Efficiency Erbium-Raman Random Fiber Laser

Low-Threshold, High-Efficiency Random Fiber Laser With Linear Output

Low threshold and high spectral purity 1.7 μm random fiber laser based on hybrid gain

LD-Pumped Random Fiber Laser Based on Erbium-Ytterbium Co-Doped Fiber

Low-threshold, high-power random fiber laser with linear output operating at 1145nm wavelength

Common-cavity ytterbium/Raman random distributed feedback fiber laser

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

Narrow-Linewidth Random Fiber Laser Based On Random Fiber Grating

Random laser emission at 1064 and 1550 nm in a Er/Yb co-doped fiber-based dual-wavelength random fiber laser

High-Power Random Raman Fiber Laser With an Ultrashort Random Fiber Grating

Random Laser with Erbium-Doped Fiber and Fs-Laser Introduced Random Fiber Grating

Ultrafast Raman fiber Laser with Random Distributed Feedback

Towards High-Power And-Efficiency ∼2.8 Μm Lasing: Lightly-Erbium-Doped ZrF4 Fiber Laser Pumped at ∼1.7 Μm

Quasi-kilowatt random fiber laser

5.1 Kw Tandem-Pumped Fiber Amplifier Seeded by Random Fiber Laser with High Suppression of Stimulated Raman Scattering

Random lasing with narrow linewidth in a short Er-doped fiber

Compact and Robust High-Order Random Raman Fiber Laser

A half-open cavity random fiber laser based on a single-mode fiber and fiber Bragg grating

Towards High-Power and -Efficiency ∼2.8 Μm Lasing: Lightly-Erbium-Doped ZrF Fiber Laser Pumped at ∼1.7 Μm

Low-noise High-Order Raman Fiber Laser Pumped by Random Lasing.