Abstract:A characteristic feature of high-entropy alloys is high strength at maintaining plasticity, wear and corrosion resistance, and fracture toughness at cryogenic temperatures. Currently, CoCrFeNiMn is the best-investigated high-entropy compound. However, its application is limited in the high-temperature region due to the low values of the deforming stress level at the plasticity breaking point at T>296 K. One of the common ways to improve the material durability is the addition of substitution atoms of larger atomic radius, and Al, Ti, and Mo are some of these atoms. The paper presents the analysis of the mechanical behavior of single crystals of CoCrFeNiMn and CoCrFeNiMо FCC high-entropy alloys (at. %) oriented along the [001] direction: the author studied the temperature dependence of critical shear stresses τcr(T) within the temperature range of T=77–973K, the type of dislocation structure, strain hardening coefficient θII, plasticity and fracture at Т=296 K under tension. The study shows that the alloying with Mo atoms 4 at. % of the CoCrFeNi system (at. %) causes the solid solution hardening, and critical shear stresses τcr increase within the entire studied temperature range. The onset of plastic deformation is associated with slip at all temperature tests. At T=296 K, the author identified a planar dislocation structure with flat dislocation pile-ups and dislocation networks in CoCrFeNiMo while in equiatomic CoCrFeNiMn, at such test temperature, a uniform distribution of dislocations was observed in several systems without flat pile-ups. Work hardening coefficient, plasticity, and the level of stresses before fracture turn out to be similar in [001]-crystals of CoCrFeNiMo and CoCrFeNiMn high-entropy alloys, which are determined by the development of slip deformation simultaneously in several systems. Crystals are destroyed viscously at 296 K at the same level of stress.

Intrinsic Properties and Strengthening Mechanism of Monocrystalline Ni-containing Ternary Concentrated Solid Solutions

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

How Atomic Bonding Plays the Hardness Behavior in the Al–Co–Cr–Cu–Fe–Ni High Entropy Family

Solid-solution strengthening effects in binary Ni-based alloys evaluated by high-throughput calculations

Mechanical properties of Al–Co–Cr–Fe–Ni high-entropy alloy: A molecular dynamics simulation

Experimental Study on the Micro-Mechanical Parameters of Ni-based Single-Crystal Superalloys Using Nanoindentation and Element Distribution Analysis

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Study on the Alloying Elements Competition Mechanism of Nix1Crx2Cox3Al15Ti10 Alloys Based on High-Throughput Computation and Numerical Analysis

Chemical Short-Range Ordering in a CrCoNi Medium-Entropy Alloy

Dependence of Mechanical Properties on the Site Occupancy of Ternary Alloying Elements in Γ'-Ni3al: Ab Initio Description for Shear and Tensile Deformation

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure

In situ synthesis of N-containing CoCrFeNi high entropy alloys with enhanced properties fabricated by selective laser melting

Microstructure and mechanical properties variation with Ni content in Al0.8CoCr0.6Fe0.7Nix (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Transition-metal-element Dependence of Ideal Shear Strength and Elastic Behaviors of Γ′-Ni3al: Ab Initio Study to Guide Rational Alloy Design

FCC-to-HCP Phase Transformation in CoCrNix Medium-Entropy Alloys

The Effects of Combining Alloying Elements on the Elastic Properties of Γ -Ni in Ni-based Superalloy: High-throughput First-Principles Calculations

Composition Effect on Elastic Properties of Model NiCo-based Superalloys

THE INFLUENCE OF CHEMICAL COMPOSITION ON SOLID SOLUTION AND STRAIN HARDENING OF SINGLE CRYSTALS OF FCC HIGH-ENTROPY ALLOYS

Simple approach to model the strength of solid-solution high entropy alloys in Co-Cr-Fe-Mn-Ni system