Abstract:In this work, preparation of Cu-Ni/Nano-Al 2 O 3 composite coating with (111)-preferred orientation on the surface of the H64 brass via electrodeposition technique. Variation of the deposition current density was found to play a key role in the control of the microstructure and strongly influence the corrosion resistance of the composite coating. Electrochemical impedance spectroscopy results indicated that the increase of nano-alumina content in composite coating is caused by the change of polarization mode. Under different current densities, the Ni (111) plane is only preferred orientation and the relative texture coefficient reaches the highest value of 54.36% at 5 A•dm -2 . The crystallite size of these coatings is about 10–55 nm dependent on current density, and high current density could refine the size. The microstructure of the coating changed from cauliflower to spherical with increasing deposition current density. Moreover, the Cu-Ni/Nano-Al 2 O 3 composite coating obtained at 5 A•dm -2 increased the polarization resistance and coating resistance of the H64 brass by about 50% and 83%, respectively. The corrosion potential ( E corr ) of Cu-Ni/Nano-Al 2 O 3 composite coating is shifted towards the nobler direction from -1.191 V to -0.063 V (Ag/AgCl) with the current density increases. The corrosion mechanism of Cu-Ni/Nano-Al 2 O 3 composite coating has gone through two stages corresponding to two-time and three-time constant of EEC models, respectively. The Cu-Ni/Nano-Al 2 O 3 has large potential merits in field of corrosion.

ELECTRODEPOSITION AND CORROSION RESISTANCE OF NI–W–Al2O3 NANOCOMPOSITE COATINGS

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Preparation and Properties of Ni–W Composite Coatings Reinforced by Graphene Nanoplatelets

Technology for Ni-Al2O3 Composite Coating and Its Properties

Influence of the bath pH value on the microstructure and properties of a novel electrodeposited Ni-W-Ti3C2TX composite coating

Effect of nano-Al 2 O 3 particle addition on Co–P–xAl 2 O 3 nanocomposite plating electroplated on X65 steel

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence

Wear resistance of Ni/nano-Al2O3 composite coatings by brush electroplating

Preparation of Chromium Carbide-Strengthened Ni-W Coatings by Electrodeposition and the Corresponding Anticorrosion Behavior in CO2-Saturated NaCl Solution

Electroless deposition of ternary Ni–P alloy coatings containing tungsten or nano-scattered alumina composite on steel

Preparation of laminar α-ZrP nanosheets enhanced Ni W nanocomposite coating and investigation of its mechanical and anti-corrosion properties

Effect of Nanoscale W Coating on Corrosion Behavior of Diamond/Aluminum Composites

Electrodeposited FeCoNiWMo high entropy alloy/SiC nanocomposite coatings: Microstructure, mechanical properties and corrosion resistance

Effect of Surface Roughness and Structure Features on Tribological Properties of Electrodeposited Nanocrystalline Ni and Ni/Al2O3 Coatings

Mechanical and Corrosion Resistance Enhancement of Closed-Cell Aluminum Foams through Nano-Electrodeposited Composite Coatings

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Corrosion Behavior of the CoNiCrAlY-Al2O3 Composite Coating Based on Core-Shell Structured Powder Design