Abstract:Inspections on microstructural design suggest that a high-strength Mg alloy can be achieved via the generation of co-precipitation of prismatic and basal precipitates with high number density and large aspect ratios. Currently, there is a lack of feasible approaches to generating such a microstructure. This work investigated the specific role of various Yb contents on the precipitation behavior, solute segregation and mechanical performance of cast Mg-9Gd-xYb-0.5Zn-0.2Zr alloys (x = 0, 0.5, 1 wt%). It was found that, the age hardening response of Mg-9Gd-0.5Zn-0.2Zr alloy could be significantly improved as the Yb addition increased, primarily ascribed to introduction of dense distribution of both prismatic and basal matrix precipitates involving gamma '', beta' and beta(1). Solute segregation of Yb had been examined utilizing high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), revealing the evidence of strong Yb segregation in both prismatic beta', beta(1) and basal gamma '' precipitates. Quantitative TEM analysis indicated that the increasing Yb addition was found to improve the number density of gamma '', beta' and beta(1) during isothermal ageing at 225 degrees C. The substantial improvement on yield strength (similar to 84 MPa) in peak-aged alloy was thereby achieved due to the co-precipitation of dense prismatic and basal strengthening phases associated with Yb addition (1 wt%). However, in addition to the promoted precipitation of these strengthening phases, Zn-Zr particles were confirmed to act as favorable nucleation sites for prismatic beta(1) phases in the under-aged condition. During prolonged ageing time, the addition of 1 wt% Yb was found to greatly accelerate the growth of these preferentially formed beta(1) phases and part of beta(1) transformed in situ into beta phases, accompanied by the gradual developments of matrix precipitate-free zones (PFZs). The greatly improved uneven distribution of these coarse beta-type phases concomitant with widened PFZs primarily led to the significant reduction in ductility as the Yb content increased up to 1%.

Characterization and Strengthening Effects of Γ′ Precipitates in a High-Strength Casting Mg-15Gd-1Zn-0.4Zr (wt.%) Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Microstructure and Strengthening Mechanism of High Strength Mg–10Gd–2Y–0.5Zr Alloy

Developing Mg-Gd-Dy-Ag-Zn-Zr Alloy with High Strength via Nano-Precipitation

Microstructure and mechanical properties of cast Mg-6Gd–Zr alloy with different Y addition

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Development of high strength sand cast Mg–Gd–Zn alloy by co-precipitation of the prismatic β′ and β1 phases

Microstructural Characteristics and Mechanical Properties of Cast Mg–3Nd–3Gd–xZn–0.5Zr Alloys

The Role of Yb Content on the Microstructural Evolution and Mechanical Characteristics of Cast Mg-9Gd-0.5Zn-0.2Zr Alloy

Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy

A Study of Microstructure, Mechanical Behavior and Strengthen Mechanism in the Mg-10Gd-0.2Zn-(Y)-0.4Zr Alloy

Characterization and Strengthening Effect of Precipitate Microstructure in Mg-3nd-3gd-0.2zn-0.5zr Alloy Aged at 225 °C

Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg–10Gd–3.5Er– X Zn–0.5Zr Alloys

Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at.%) alloy

Effect of Zn Addition on Microstructure and Mechanical Properties of Mg–9Gd–3Y–0.5Zr Alloy

Effects of Gd and Zr Additions on the Microstructures and High-Temperature Mechanical Behavior of Mg–Gd–Y–Zr Magnesium Alloys in the Product Form of a Large Structural Casting

Achieving Ultra-High Strength in Mg–Gd–Ag–Zr Wrought Alloy Via Bimodal-Grained Structure and Enhanced Precipitation

Precipitation and its effect on the mechanical properties of a cast Mg–Gd–Nd–Zr alloy

Effect of Gd Content on Microstructure and Mechanical Properties of Mg-xGd-Zr Alloys Via Semicontinuous Casting

Microstructure and Super High Strength of Cast Mg-8.5gd-2.3y-1.8ag-0.4zr Alloy