Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A 60-Ghz 360° 5-Bit Phase Shifter with Constant IL Compensation Followed by a Normal Amplifier with ±1 Db Gain Variation and 0.6-Dbm OP $_{\mathrm{ -1Db}}$

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An Ultra Broadband Passive Vector Modulator Phase Shifter

A Calibration Scheme for 24–28-Ghz Variable-Gain Phase Shifter in 65-Nm CMOS

A 60 GHz 360° 5-Bit Digitally Controlled High-Pass/direct-pass T-type Phase Shifter Using Nmos Body-Floating Switch

Hybrid broadband high-precision phase shifter integrated circuit

A 60GHz 360° digitally controlled phase shifter with 6-bit resolution and 2.3° maximal rms phase error in 65nm CMOS technology

A 26-32Ghz 6-Bit Bidirectional Passive Phase Shifter with 14dbm IP1dB and 2.6° RMS Phase Error for Phased Array System in 40nm CMOS

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A 60ghz 360 Degrees Digitally Controlled Phase Shifter With 6-Bit Resolution And 2.3 Degrees Maximal Rms Phase Error In 65nm Cmos Technology

A 27–31 ghz 6-Bit Phase Shifter with Low Phase Error/gain Variation in 65 nm CMOS

A 14-18Ghz 6bit Passive Phase Shifter in 0.13µm SiGe BiCMOS

A W-Band 6-Bit Phase Shifter With 7 dB Gain and 1.35° RMS Phase Error in 130 nm SiGe BiCMOS

A 6-Bit Phase Shifter with Low RMS Phase Error and Flat Gain Across 1.9–2.6Ghz

A 0.3–4.2-Ghz Frequency-Agile Phase Shifter Based on N-Path Passive Mixers Achieving Low Rms Phase/Amplitude Error

A 21 to 30-Ghz Merged Digital-Controlled High Resolution Phase Shifter-Programmable Gain Amplifier with Orthogonal Phase and Gain Control for 5-G Phase Array Application

A 24.25-26.65 Ghz 6-Bit Vector-Sum Phase Shifter in 65nm Cmos

A 4-Bit CMOS Phase Shifter for Millimeter-Wave Phased Arrays