Abstract:The effect of 0.5at% Ag and its combination with 0.4at% Zn on the precipitation hardening behavior of Mg-1.5Sn-0.5Mn (at%) alloy have been investigated using hardness measurements and transmission electron microscopy (TEM). The results show that sole addition of Ag can remarkably improve the peak hardness from 58HV to 77HV after ageing at 200°C, which is attributed to the increased number density, the size and so the volume fraction of the Mg 2Sn lath precipitates. A combination addition of Ag and Zn further improves the peak-hardness to 83HV and the time to peak hardness has been reduced from 120h to 100h. The joint addition of Ag and Zn both increases the number density and refines the Mg 2Sn precipitates. Zn also promotes the Mg 2Sn precipitates lying on the non-basal plane of matrix, as well as the blocky Mg 54Ag 17 phase which has an orientation relationship with α-Mg matrix as (001) e{open}'//(0001) α, [200] e{open}'//[-1-120] α, [0-20] e{open}'//[1-100] α. In the peak-aged Ag modified alloys, Ag atoms are segregated in the Mg 2Sn precipitates. Nucleation, growth and coarsening of the Mg 2Sn precipitates simultaneously occur as the ageing proceeds. The growth of Mg 2Sn precipitates exhibits a significant anisotropic behavior. Addition of Ag can promote the precipitation process during the underage period and retarding the growth of Mg 2Sn during the overage period, leading to a more thermal stable microstructure of the Ag and Ag+Zn modified alloys, from which only a small hardness decrease after 700h ageing is detected. © 2012 Elsevier B.V.

Effects of Ag Addition on Precipitation and Fatigue Crack Propagation Behavior of a Medium-Strength Al–Zn–Mg Alloy

The effect of Ag on the tensile strength and fracture toughness of novel Al-Mg-Zn alloys

Enhanced age-hardening response and mechanical properties of the Mg-Gd-Y-Zn-Zr alloy by trace Ag addition

Effects of Ag Addition on Ageing Precipitation and Microstructure Thermal Stability of an Al-Cu-Mg-Mn Alloy

Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy

Enlarged Zn Content Improves Fatigue Crack Propagation Resistance of Two Al-Zn-Mg-Cu Alloys with Multiple Aging Tempers

Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys

Improved age-hardening behavior of Mg-Sn-Mn alloy by addition of Ag and Zn

Microstructure, Mechanical Properties, and Corrosion Behavior of Al-4.0Cu-1.1Li-0.5Mg-xAg Alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Influence of Ag on microstructure, mechanical properties and tribological properties of as-cast Al-33Zn-2Cu high-zinc aluminum alloy

Effects of Ag Micro-alloying on Heat-resistant Properties of Al-Cu-Mg-Mn-(Zr,Ti)Alloy

Effect of Heat Treatment on Fatigue Life Improvement of Mg-Gd-Zn-Zr Alloy

Influence of Zn Addition on the Aging Precipitate Behavior and Mechanical Properties of Al-Cu-Li Alloy

Effect of trace silver addition on microstructure and properties of Cu-0.45Cr-0.1Zr alloy

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Regulation of precipitation behavior among T1, S', and θ' phases in Al–Cu–Li-(Mg–Ag) alloys by optimizing Ag/Mg ratios

Quantitative evaluation of the effect of Ag-addition on the concurrently-existing precipitation kinetics in the aged Al-Cu-Mg(-Ag) alloys

Effect of Zn on Precipitation Evolution and Mechanical Properties of a High Strength Cast Al-Li-Cu Alloy

Enhanced Age-Hardening Response and Microstructure Study of an Ag-modified Mg–Sn–Zn Based Alloy