Abstract:Hollow granular mold flux is an essential functional material in the continuous casting process, and its melting behavior significantly influences continuous casting. The existing research mainly focuses on the influence of the characteristics of mold flux on the melting behavior and does not involve the operation of mold flux. This study explored the effect of flux layer thickness on the melting behavior of mold fluxes using a melting rate test method based on a copper bath and numerical simulation. The results show that with the increase in the flux layer thickness, the melting rate of mold fluxes shows the trend of the 'M curve,' including two upward and two downward stages. The 'M curve' is related to the temperature and combustion behavior of carbonaceous materials in the flux layer. In the first stage, as the thickness increases, the thermal insulation of the flux layer is significantly improved, which promotes the melting of the mold flux. In the second stage, the increase in flux layer thickness hinders the diffusion of O 2 from the air to the flux layer, and the carbon–oxygen reaction rate decreases, which is not conducive to the combustion of carbonaceous materials and the flux melting. In the third stage, the increase in the flux layer thickness hinders the diffusion of CO 2 to the outside, increases the CO 2 concentration in the flux layer, promotes the Boudouard reaction, and increases the melting rate. In the fourth stage, with the increase in the flux layer thickness, O 2 can only diffuse to the low-temperature zone (< 400 °C) of the flux layer and cannot participate in the carbon–oxygen reaction and form CO 2 , which decreases the rate of Boudouard reaction and the melting rate of mold flux.

Study of the Viscosity of Mold Flux Based on the Vogel–Fulcher–Tammann (VFT) Model

Melting Point and Viscosity Measurement of Continuous Casting Mold Flux with Volatiles

Viscosity and melting temperature prediction of mold fluxes based on explainable machine learning and SHapley additive exPlanations

An in-situ investigation on the microstructure and viscosity characteristic of mold flux during slag-metal reaction process

Melting and Flowing Behavior of Mold Flux in a Continuous Casting Billet Mold for Ultra-High Speed

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Viscosity measurement and prediction model of molten iron

Effect of Al2O3/Na2O ratio and MnO on high-temperature properties of mold flux for casting peritectic steel

Simulation of the Effect of Flux Layer Thickness on the Melting Behavior of Mold Fluxes Based on the Copper Bath Method

Thickness Distributions of Mold Flux Film and Air Gap in Billet Ultra-High Speed Continuous Casting Mold Through Multiphysics Modeling

An Experimental Study of Viscosity in FeO-SiO2-V2O3-TiO2 System

Modeling Viscosity of High Titania Slag

Study of Thermodynamic for Low-Reactive CaO-BaO-Al2O3-SiO2-CaF2-Li2O Mold Flux Based on the Model of Ion and Molecular Coexistence Theory

In-depth study of mold heat transfer for the high speed continuous casting process

A modified microscale viscosity model of polymer melts and experimental verification

Influence of BaO and MgO on viscosity, crystalline phase, and structure of CaO–Al2O3–10%SiO2–20%CaF2-based system

Influence of Casting Temperature and Mold Preheating Temperature on Centrifugal Casting by Numerical Simulation

Transient flow and mold flux behavior during ultra-high speed continuous casting of billet

Relationship Between Liquid Structure and Property Ⅱ—— Kinematic Viscosity of Mg-9Al Melt and Its Relationship with the Microstructure

Assessment of heat transfer through mold slag film considering radiative absorption behavior of mold fluxes

Structure and Property of Metal Melt III—Relationship Between Kinematic Viscosity and Size of Atomic Clusters