Abstract:High strength-elongation synergy and its dependence on microstructure are the eternal themes of metallic materials including Ti alloys. In this study, the relationship between the microstructure evolution and mechanical properties of the Ti-25Zr-4Al-1.5Mn (TZAM, wt. %) near-α Ti alloy was systematically investigated after hot rolling at temperatures ranging in the whole solid solution region. The content of primary α phase decreased gradually with the increasing of rolling temperature. An excellent comprehensive mechanical properties with a yield strength of 1055±10 MPa and a total elongation of 23.6±0.6% were obtained for the specimen after rolling at 750 °C (single α phase temperature region). This great strength-elongation synergy is mainly due to the synthetic action of substructure strengthening, dislocation strengthening, basal random heterogeneity (BRH) texture, and suitable content of β phase. The α" martensitic phase was formed after rolling at temperatures of 800 and 850 °C (α + β two-phase temperature region), resulting in a significant decrease in yield strength. However, remarkable work hardening with a rate of approximately 10 GPa occurred in both specimens. The whole evolution process of primary α grains, namely dynamic recovery and recrystallization during hot-rolled is deeply discussed. When the rolling temperature increased to 900 °C (single β phase temperature region), the dominated acicular α´ martensitic phase with high dislocation density resulted in an ultra-high strength (1264±12 and 1488±11 MPa for yield and tensile strength respectively) at the expense of plasticity. These findings revealed the microstructure evolution and its relationship to the mechanical properties of a TiZr-based alloy after the thermomechanical processing and helped to understand deeply the theory of metallic strengthening and elongation.

Effect of Microstructure on Torsion Properties of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Enhancing Ductility of Titanium Matrix Composites by Multimodal Α-Grains

Effect of microstructures on mechanical properties of Ti‐6.5Al‐2Sn‐4Zr‐4Mo‐1W‐0.2Si alloy

Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy

Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy

Enhanced Mechanical Properties of Ti-5Al-5Mo-5V-3Cr-1Zr by Bimodal Lamellar Precipitate Microstructures Via Two-Step Aging

Effect of Solution Temperature on Microstructure and Mechanical Properties of Ti–5Al5Mo5V3Cr1Zr Alloy

Influence of microstructure on strain controlled low cycle fatigue crack initiation and propagation of Ti-55531 alloy

Tensile performance and impact toughness of Ti-55531 alloy with multilevel lamellar microstructure

Effect of Deformation Temperature on the Microstructure and Texture Evolution of Ti-6Al-4Zr-2Mo-6V Alloy

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Effect of Repetitive Bending and Straightening Process on Microstructure Properties and Deformation Mechanism of A Ti–Al–Cr–Mo Alloy

Microstructure and Mechanical Properties Evolution of High-Temperature Titanium Alloys with In Situ Synthesized TiB Whiskers

Effect of Microstructure on High-Speed Tensile Mechanical Properties of Ti-1300 Alloy

Breaking the high-temperature strength-ductility trade-off in TiAl alloys through microstructural optimization

The Effect of Precursory Α and Ω Phase on Microstructure Evolution and Tensile Properties of Metastable Β Titanium Alloy

Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Microstructure evolution and its effect on the impact toughness of the Ti-Al-V-Mo-Zr alloy tube