Abstract:A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]-thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)(2)), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D-2 donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis [6-fluoro-4-(5'-hexyl-[2,2 '-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)(2)), which contains the stronger donor fragment clithienosilole (DTS) as D-2, one finds that p-SIDT(FBTTh2)(2) exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)(2) can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)(2) spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)(2):PC7IBM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)(2):PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)(2):PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

Solvent Annealing Effects in Dithieno[3,2-b:2′,3′-d]pyrrole–5,6-Difluorobenzo[c][1,2,5]thiadiazole Small Molecule Donors for Bulk-Heterojunction Solar Cells

Benzo[1,2‐b:4,5‐b′]Dithiophene–6,7‐Difluoroquinoxaline Small Molecule Donors with >8% BHJ Solar Cell Efficiency

Donor and Acceptor Unit Sequences Influence Material Performance in Benzo[1,2‐b:4,5‐b′]dithiophene–6,7‐Difluoroquinoxaline Small Molecule Donors for BHJ Solar Cells

Benzo[1,2-b:4,5-b′]dithiophene–Pyrido[3,4-b]pyrazine Small-Molecule Donors for Bulk Heterojunction Solar Cells

Additive‐Morphology Interplay and Loss Channels in “all‐small‐molecule” Bulk‐heterojunction (BHJ) Solar Cells with the Nonfullerene Acceptor IDTTBM

Effects of the Center Units of Small‐Molecule Donors on the Morphology, Photovoltaic Performance, and Device Stability of All‐Small‐Molecule Organic Solar Cells

Modulating Crystallinity and Miscibility via Side‐chain Variation Enable High Performance All‐Small‐Molecule Organic Solar Cells

Effects of Solvent Vapour Annealing on the Performances of Benzo[1,2-B:4,5-B′]dithiophene and 4,7-Di(4-hexyl-thiophen-2-yl)-5,6-difluorine-2,1,3-benzothiadiazole-based Alternating Polymer Solar Cells with Different Configurations

Fine-Tuning Miscibility and π–π Stacking by Alkylthio Side Chains of Donor Molecules Enables High-Performance All-Small-Molecule Organic Solar Cells

End Group Effect of Asymmetric Benzodithiophene‐Based Donor with Liquid‐Crystal State for Small‐Molecule Binary Solar Cell

Efficient bulk heterojunction solar cells based on solution processed small molecules based on the same benzo[1,2-b:4, 5-b']thiophene unit as core donor and different terminal units.

A Bi-Continuous Network Structure of P-Dts(Fbtth2)(2)/Ep-Pdi Via Selective Solvent Vapor Annealing

High Efficiency Organic Solar Cells Based on Amorphous Electron-Donating Polymer and Modified Fullerene Acceptor

Π-Bridge-independent 2-(Benzo[c][1,2,5]thiadiazol-4-ylmethylene)malononitrile-substituted Nonfullerene Acceptors for Efficient Bulk Heterojunction Solar Cells

Donor−Acceptor Polymers Incorporating Alkylated Dithienylbenzothiadiazole for Bulk Heterojunction Solar Cells: Pronounced Effect of Positioning Alkyl Chains

Silaindacenodithiophene-Based Molecular Donor: Morphological Features and Use in the Fabrication of Compositionally Tolerant, High-Efficiency Bulk Heterojunction Solar Cells

New Insight of Molecular Interaction, Crystallization and Phase Separation in Higher Performance Small Molecular Solar Cells Via Solvent Vapor Annealing

Small Molecule Donors Design Rules for Non‐Halogen Solvent Fabricated Organic Solar Cells

Asymmetric Isomer Effects in Benzo[ c ][1,2,5]thiadiazole‐Fused Nonacyclic Acceptors: Dielectric Constant and Molecular Crystallinity Control for Significant Photovoltaic Performance Enhancement

Dithienobenzothiadiazole-Bridged Nonfullerene Electron Acceptors for Efficient Organic Solar Cells

An effective heteroatom-substituted strategy on photovoltaic properties of D(A-Ar)2 small molecules for efficient organic solar cells