Abstract:A novel solution-processable small molecule, namely, benzo[1,2-b:4,5-b]bis(4,4'-dihexyl-4H-silolo[3,2-b]-thiophene-2,2'-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole (p-SIDT(FBTTh2)(2)), was designed and synthesized by utilizing the silaindacenodithiophene (SIDT) framework as the central D-2 donor unit within the D(1)AD(2)AD(1) chromophore configuration. Relative to the widely studied 7,7'-[4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl]bis [6-fluoro-4-(5'-hexyl-[2,2 '-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole] (p-DTS(FBTTh2)(2)), which contains the stronger donor fragment clithienosilole (DTS) as D-2, one finds that p-SIDT(FBTTh2)(2) exhibits a wider band gap and can be used to fabricate bulk heterojunction solar cells with higher open circuit voltage (0.91 V). Most remarkably, thin films comprising p-SIDT(FBTTh2)(2) can achieve exceptional levels of self-organization directly via solution deposition. For example, high-resolution transmission electron microscopy analysis shows that p-SIDT(FBTTh2)(2) spin-cast from chlorobenzene organizes into crystalline domains with lattice planes that extend over length scales on the order of hundreds of nanometers. Such features suggest liquid crystalline properties during the evolution of the film. Moreover, grazing incidence wide-angle X-ray scattering analysis shows a strong tendency for the molecules to exist with a strong "face-on" orientation relative to the substrate plane. Similar structural features, albeit of more restricted dimensions, can be observed within p-SIDT(FBTTh2)(2):PC7IBM bulk heterojunction thin films when the films are processed with 0.4% diiodooctane (DIO) solvent additive. DIO use also increases the solar cell power conversion efficiencies (PCEs) from 1.7% to 6.4%. Of significance from a practical device fabrication perspective is that, for p-SIDT(FBTTh2)(2):PC71BM blends, there is a wide range of compositions (from 20:80 to 70:30 p-SIDT(FBTTh2)(2):PC71BM) that provide good photovoltaic response, i.e., PCE = 4-6%, indicating a robust tendency to form the necessary continuous phases for charge carrier collection. Light intensity photocurrent measurements, charge selective diode fabrication, and internal quantum efficiency determinations were carried out to obtain insight into the mechanism of device operation. Inclusion of DIO in the casting solution results in films that exhibit much lower photocurrent dependence on voltage and a concomitant increase in fill factor. At the optimum blend ratio, devices show high charge carrier mobilities, while mismatched hole and electron mobilities in blends with high or low donor content result in reduced fill factors and device performance.

A Bi-Continuous Network Structure of P-Dts(Fbtth2)(2)/Ep-Pdi Via Selective Solvent Vapor Annealing

Separating Crystallization Process of P3HT and O‐IDTBR to Construct Highly Crystalline Interpenetrating Network with Optimized Vertical Phase Separation

Achieving Balanced Intermixed and Pure Crystalline Phases in PDI-based Non-Fullerene Organic Solar Cells Via Selective Solvent Additives

A Universal Approach to Improve Electron Mobility Without Significant Enlarging Phase Separation in IDT-based Non-Fullerene Acceptor Organic Solar Cells

Solvent Annealing Effects in Dithieno[3,2-b:2′,3′-d]pyrrole–5,6-Difluorobenzo[c][1,2,5]thiadiazole Small Molecule Donors for Bulk-Heterojunction Solar Cells

Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Suppressed Charge Recombination in Polymer Solar Cells Based on Perylene Diimide Derivative Acceptors Via Solvent Vapor Annealing

Morphology and Efficiency Enhancements of PTB7-Th:ITIC Nonfullerene Organic Solar Cells Processed Via Solvent Vapor Annealing

Improving the Molecular Packing Order and Vertical Phase Separation of the P3HT:O-IDTBR Blend by Extending the Crystallization Period of O-IDTBR

Highly Efficient Solar Cells Based on the Copolymer of Benzodithiophene and Thienopyrroledione with Solvent Annealing

Silaindacenodithiophene-Based Molecular Donor: Morphological Features and Use in the Fabrication of Compositionally Tolerant, High-Efficiency Bulk Heterojunction Solar Cells

Synergetic Solvent Engineering of Film Nanomorphology to Enhance Planar Perylene Diimide-Based Organic Photovoltaics.

Alkylsilyl Functionalized Copolymer Donor for Annealing‐Free High Performance Solar Cells with over 11% Efficiency: Crystallinity Induced Small Driving Force

Feasible D1-A-D2-A Random Copolymers For Simultaneous High-Performance Fullerene And Nonfullerene Solar Cells

Cooperative Effects Of Solvent And Polymer Acceptor Co-Additives In P3ht:Pdi Solar Cells: Simultaneous Optimization In Lateral And Vertical Phase Separation

Unraveling the Effect of Solvent Additive and Fullerene Component on Morphological Control in Organic Solar Cells

2D/1a Strategy to Regulate Film Morphology for Efficient and Stable Nonfullerene Organic Solar Cells

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Restricting The Liquid-Liquid Phase Separation Of Ptb7-Th:Pf12tbt:Pc71bm By Enhanced Ptb7-Th Solution Aggregation To Optimize The Interpenetrating Network

High Efficiency Organic Solar Cells Based on Amorphous Electron-Donating Polymer and Modified Fullerene Acceptor

Asymmetric Isomer Effects in Benzo[ c ][1,2,5]thiadiazole‐Fused Nonacyclic Acceptors: Dielectric Constant and Molecular Crystallinity Control for Significant Photovoltaic Performance Enhancement