Abstract:Magnesium rare-earth (Mg-RE) alloys have great potential in lightweight applications because of the high specific strength. Wire-arc directed energy deposition (WA-DED) exhibits great prospects for the fabrication of large-scale monolithic structural components with high manufacturing flexibility. In this work, a single-pass multilayer Mg‐10Gd‐3Y‐1Zn‐0.5Zr (wt%, GWZ1031K) deposit was prepared via WA-DED. Electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are conducted to systematically explore the microstructural evolution during the WA-DED process and the subsequent heat treatment . The GWZ1031K alloy deposit fabricated by WA-DED exhibits uniform equiaxed grain structure whose average grain size is 22.3 ± 5.6 μm. The (Mg,Zn) 3 (Gd,Y) phase and RE segregation can be observed along the α-Mg grain boundaries (GBs). A number of needle-like γ ́ /γ ́ ́ phases embedded in the α-Mg grain interior (GI). In addition, there is a small number of fine RE-rich cubic phase and (Gd,Y) 2 O 3 particles. The deposit shows significantly enhanced ductility and slightly improved strength after solution treated at 500 °C for 12 h. After the solution treatment, the intergranular (Mg,Zn) 3 (Gd,Y) eutectics dissolve into the matrix and long period stacking ordered (LPSO) phases precipitate from the GBs into the GI, contributing to the enhancement in ductility. Besides, the LPSO phase along with the existing RE-rich cubic phase, (Gd,Y) 2 O 3 and Zr particles at GBs also play a role in hindering grain growth. The high-density nanoscale β ́ phases appear in the GI after aging treated at 200 °C for 24 h, resulting in the remarkable precipitation strengthening. In comparison with the solution-treated GWZ1031K deposit, the aging-treated exhibits a prominently improved ultimate tensile strength of 337 ± 7 MPa in the building direction (BD) and 331 ± 5 MPa in the travelling direction (TD). It is envisaged that the WA-DED manufacturing method will provide a simple and effective route to fabricate large-scale Mg-RE alloy components for various applications.

Ultrahigh Strength As-Extruded Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca Alloy Containing W Phase

Influence of Size and Distribution of W Phase on Strength and Ductility of High Strength Mg-5.1Zn-3.2Y-0.4Zr-0.4Ca Alloy Processed by Indirect Extrusion

High Strength Extruded Mg–5Zn–2Nd–1.5Y–0.6Zr–0.4Ca Alloy Produced by Electromagnetic Casting

The Partial Substitution of Y with Gd on Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-10Zn-6Y-0.5Zr Alloy

High-strength Mg‐10Gd‐3Y‐1Zn‐0.5Zr alloy fabricated by wire-arc directed energy deposition: Phase transformation behavior and mechanical properties

Ultrahigh Strength Mg-Al-Ca-Mn Extrusion Alloys with Various Aluminum Contents

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effect of W-phase on the Mechanical Properties of As-Cast Mg–Zn–Y–Zr Alloys

Development of High-Strength, Low-Cost Wrought Mg–2.5mass% Zn Alloy Through Micro-Alloying with Ca and La

Realizing ultra-fine grains and ultra-high strength in conventionally extruded Mg-Ca-Al-Zn-Mn alloys: The multiple roles of nano-precipitations

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Achieving Ultra-High Strength in Mg–Gd–Ag–Zr Wrought Alloy Via Bimodal-Grained Structure and Enhanced Precipitation

High Performance Mg Alloy with Designed Microstructure and Phases

Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure

Microstructures and Mechanical Properties of Mg-10Gd-3Y-2Zn-0.5Zr Alloy

Microstructure and Mechanical Property of the Large Cross-Sectioned Mg–Gd–Y–Zn–Zr Alloy Produced by Small Extrusion Ratio

A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion

Achieving exceptional ultrahigh-strength in low-alloy Mg-1Al-1Ca-0.4Mn (wt%) alloy by regulating bimodal microstructure

Microstructures and Mechanical Properties of an Ultrathin Wall High-Pressure Die Casting Mg-8Zn-8Al (wt%) Alloy

Dynamic Microstructural Changes During Hot Extrusion and Mechanical Properties of a Mg–5.0 Zn–0.9 Y–0.16 Zr (wt.%) Alloy