Abstract:Molybdenum disulfide shows promise as an anode material for lithium-ion batteries. However, its commercial potential has been constrained due to the poor conductivity and significant volume expansion during the charge/discharge cycles. To address these issues, in this study, N-doped MoS2/C composites (NMC) were prepared via an enhanced hydrothermal method, using ammonium molybdate and thiourea as molybdenum and sulfur sources, respectively. Polyethylene glycol 400 (PEG400) and polyvinylpyrrolidone (PVP) were added in the hydrothermal procedure as soft template surfactants and nitrogen/carbon sources. The crystal structure, morphology, elemental composition, and surface valence state of the N-doped MoS2/C composites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and X-ray photoelectron spectroscopy (XPS), respectively. The results indicate that the NMC prepared by this method are spherical particles with a nanoflower-like structure composed of MoS2 flakes, having an average particle size of about 500 nm. XPS analysis shows the existence of C and N elements in the samples as C-N, C-C, and pyrrolic N. As anodes for LIBs, the NMC without annealing deliver an initial discharge capacity of 548.2 mAh·g-1 at a current density of 500 mA·g-1. However, this capacity decays in the following cycles with a discharge capacity of 66.4 mAh·g-1 and a capacity retention rate of only 12% after 50 cycles. In contrast, the electrochemical properties of the counterparts are enhanced after annealing, which exhibits an initial discharge capacity of 575.9 mAh·g-1 and an ultimate discharge capacity of 669.2 mAh·g-1 after 70 cycles. The capacity retention rate decreases initially but later increases and elevated afterward to reach 116% at the 70th cycle, indicating an improvement in charge-discharge performance. The specimens after annealing have a smaller impedance, which indicates better charge transport and lithium-ion diffusion performance.

Molybdenum Disulfide-Coated Lithium Vanadium Fluorophosphate Anode: Experiments and First-Principles Calculations

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

MoO2 Nanobelts Modified with an MOF-derived Carbon Layer for High Performance Lithium-Ion Battery Anodes

MOF-derived iron sulfide nanocomposite with sulfur-doped carbon shell as a promising anode material for high-performance lithium-ion batteries

PEG-PVP-Assisted Hydrothermal Synthesis and Electrochemical Performance of N-Doped MoS2/C Composites as Anode Material for Lithium-Ion Batteries

Mixed Molybdenum Oxides with Superior Performances As an Advanced Anode Material for Lithium-Ion Batteries

Molybdenum Atom Engineered Vanadium Disulfide for Boosted High‐Capacity Li‐Ion Storage

Dual Regulation Mechanism of MoS2/MoO3 Heterostructure for Polysulfide and Volume Effect Enables Stable and Durable Lithium Storage

Li4Mo5O17 micron particles as new high-performance anode materials for lithium-ion batteries

Lithium Storage Mechanisms and Electrochemical Behavior of a Molybdenum Disulfide Nanoparticle Anode

Synthesis of porous MoV2O8 nanosheets as anode material for superior lithium storage

Pseudocapacitance and Diffusion-Controlled Dual Modes of MoS2 Nano-Particles Enable High Long-Cycle Anode Capacity

Facile Synthesis of Molybdenum Disulfide Nanosheets/Nitrogen-Doped Porous Carbon Composites for High-Performance Anode Material in Lithium-Ion Batteries

LiFe(MoO4)2 as a novel anode material for lithium-ion batteries.

Electrochemical Characteristics of Lithium Vanadate, Li3VO4 As a New Sort of Anode Material for Li-ion Batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Zr0.1Fe0.9V1.1Mo0.9O7 as Cathode for Lithium-Ion Battery

Amorphous Vanadium Oxide Nanosheets with Alterable Polyhedron Configuration for Fast-Charging Lithium-Ion Batteries.

Freeze-drying-assisted Synthesis of Mesoporous CoMoO4 Nanosheets as Anode Electrode Material for Enhanced Lithium Batteries

Metal Oxides with Distinctive Valence States in an Electron‐Rich Matrix Enable Stable High‐Capacity Anodes for Li Ion Batteries