Abstract:This study presented the experimental and theoretical results of insulated concrete Sandwich panels with innovative dumbbell-shaped steel fiber-reinforced polymer (FRP) composite bar (SFCB) connectors under flexural load. The influences of FRP thickness and raised thickness of dumbbell ends of connectors, axial compression ratio, the content of vitrified microspheres in the wythes, and loading direction were discussed. The increase in thickness of a glass FRP (GFRP) jacket on the hybrid bar from 2 to 3 mm led to increased initial cracking load, ultimate load, and flexural stiffness of the Sandwich panels by 75, 49, and 16%, respectively. The increase in the thickness of dumbbell ends from 4 to 6 mm led to increased initial cracking load, ultimate load, and flexural stiffness of the Sandwich panels of 18, 46, and 9%, respectively. The incorporation of vitrified microspheres in concrete wythes resulted in a significant increase in the load-carrying capacity of Sandwich panels but decreased ductility. Increased axial compression ratio from 0/1 to 0.2/1 contributed in improving the crack resistance and ultimate loads of Sandwich panels. Further increase of the axial compression ratio to 0.4/1 led to crushing failure of concrete wythe ends. Specimens under negative loads had higher ultimate loads than the counterparts under positive loads. Three-dimensional finite-element (FE) models were developed to simulate Sandwich panel flexural behavior and numerical results compared with the test data. Then, the verified FE model was used to analyze the influence of the arrangement of dumbbell-shaped SFCB connectors. Increased connector spacing from 550 to 650 mm was found to have an insignificant influence on load-deflection responses. Moreover, analytical solutions for deflection of Sandwich panels under combined axial-flexural load were obtained, in which the effect of slipping between the facade and structural wythes and shear deflection were considered. The predicted deflection at the ultimate load agreed well with the test results. This study provided a theoretical basis and design reference for FRP-jacketed steel-composite connectors in applications of Sandwich wall panels with large insulation layer thickness.

Effect of Size and Shape of Joining Insert on the Strength of Sandwich-Structured Laminate Panels for Wheeled Vehicle’s Body

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Enhancement of Tensile Strength of Embedded Parts in Carbon Fiber-Reinforced Plastic/Aluminum Honeycomb Sandwich Structures for Vehicle

Pull-Through Behavior of Novel Additively Manufactured Sandwich Composite Inserts

Strength, Stiffness, and Panel Peeling Strength of Carbon Fiber-Reinforced Composite Sandwich Structures with Aluminum Honeycomb Cores for Vehicle Body

Characteristics of an improved boundary insert for sandwich panels with lattice truss cores

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Study on automobile body performance of honeycomb sandwich composite material

Design and strength optimisation of inserts embedded into fibre reinforced laminates

Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining

Experimental and Numerical Development on Multi-Material Joining Technology for Sandwich-Structured Composite Materials

Analysis of Honeycomb and Sandwich Structure Compression Property and the Damage of Double Cell Wall

Manufacture of honeycomb core sandwich structures by hybrid approaches: Analysis using lab scale experiments and numerical simulation

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

Structural analysis and strength-to-weight optimization of wood-based sandwich composite with honeycomb core under three-point flexural test

Repeated impact response of honeycomb sandwich panels based on the failure parameters of adhesive layer and material

Mechanical Properties of L-joint with Composite Sandwich Structure

Flexural Behavior of Insulated Concrete Sandwich Panels using FRP-Jacketed Steel-Composite Connectors

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core