Abstract:Segregated conductive polymer composites exhibit excellent electrical properties with a low percolation threshold. However, the mechanical properties of the segregated conductive polymer composites were always poor because the conductive fillers at the interfaces hinder polymer chain diffusion and thus lead to weak interfacial interaction between the conductive fillers and the polymer matrix. In this paper, polyamide-6 and polyamide-612 microspheres were synthesized via the in situ anionic ring opening of caprolactam and laurolactam. Segregated graphite sheets/polyamide-6(GS/PA6) and polyamide-612(PA612) composites with good mechanical properties were realized via high-pressure solid-phase compression molding. The microstructures of the composite samples were observed by scanning electron microscopy, which showed that the formation of a GS-conductive network at the PA6 granule interfaces in the segregated conductive structures and the adopting of PA612 considerably improved the interfacial adhesion of the composites. A superior impact strength of 5.1 kJ/m2 was achieved with 50 wt% PA612 loading owing to improvements in the interface compatibility between PA6 and GS. The composites possessed an ultralow percolation threshold, which was ascribed to the segregated network structure being successfully constructed inside the material. As for GS/PA6 composites, the combination of segregated GS-conductive networks achieved an ultralow percolation of 2.8 vol%. The percolation of 80PA6/20PA612-GS composites was slightly higher, measuring up to 3.2 vol%. Moreover, the thermal conductivity of the 80PA6/20PA612-GS composites increased from 0.26 to around 0.5 W/(m·K), which was 1.9 times larger than the pure polyamide.

Preparation and Characterization of Synergistically Improved Thermally Conductive Polyamide 6 with Low Melting Point Metal and Low-Temperature Expandable Graphite

Synergistically Improved Thermal Conductivity of Polyamide-6 with Low Melting Temperature Metal and Graphite

Effect of Thermal Annealing on the Electrical Conductivity of Copper-Tin Polymer Composites.

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Enhanced Thermal Conductivity in Polyamide 6 Composites Based on the Compatibilization Effect of Polyether-Grafted Graphene

Preparation of Highly Thermally Conducting Polyamide 6/graphite Composites Via Low‐temperature in Situ Expansion

A double mixing process to greatly enhance thermal conductivity of graphene filled polyamide 6 composites

High Thermally Conducting Composites Obtained Via in Situ Exfoliation Process of Expandable Graphite Filled Polyamide 6

Enhanced Mechanical Property of Polyamide-6/Graphite Sheet Composites with Segregated 3D Network Binary Structure for High Thermal Conductivity

Enhanced Thermal Conductivity of Polyamide 6/polypropylene (PA6/PP) Immiscible Blends with High Loadings of Graphite

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Simultaneously improving thermal conductivity and dielectric properties of poly(vinylidene fluoride)/expanded graphite via melt blending with polyamide 6

Enhanced Thermal Properties of Polyamide 6, 6 Composite/aluminum Hybrid Via Injection Joining Strategy

Super-high thermal conductivity of polyamide-6/graphene-graphene oxide composites through in situ polymerization

Thermally conductive composites obtained by flake graphite filling immiscible Polyamide 6/Polycarbonate blends

Structure Design of PA6 Based Thermal Conductive Composites with Balanced Performance

Nylon 6 induced morphological developments and electrical conductivity improvements of polypropylene/carbon black composites

A facile strategy to improve the mechanical and thermal conductivity of PA6 nanocomposites by introducing graphene oxide/sodium benzoate compounding nucleator

Preparation of ionic liquid modified graphene and its effect on enhancing the properties of PA6 composites

Reactive Extrusion for Efficient Preparation of High Temperature Resistant PA6T/66/BN Composites with Great Thermal Management and Mechanical Properties

Synchronously Improved Thermal Conductivity and Mechanical Property for Polybenzimidazole Composites by Building the Ternary Hybrid Nanofillers Networks