Abstract:Carbon fiber (CF)-reinforced polyamide 6 (PA6) composites have an excellent performance, attributed to properties such as light quality, high strength, and vibration reduction, and they are widely used in fields such as aerospace and transportation. Four kinds of carbon fiber-reinforced polyamide 6 (CF/PA6) composite pellets with carbon fiber contents of 20, 30, 40, and 50 wt.% were prepared using twin screw extrusion. The results were characterized using a simultaneous thermal analyzer, capillary rheometer, electronic universal material testing machine, and scanning electron microscope (SEM); their crystallization, rheological behavior, mechanical properties, surface structure, etc., were studied. DSC results indicate that an increase in carbon fiber content enhances the thermal stability of CF/PA6 and narrows the crystallization window but has a minor effect on the molecular chain diffusion time. The crystallinity reaches its maximum at a carbon fiber content of 40 wt.%, reaching 55.16%. The steady-state rheological behavior reveals that CF/PA6 behaves as a pseudoplastic fluid, exhibiting shear-thinning behavior. When the carbon fiber content is 40 wt.%, the power law exponent (n) reaches its maximum, and the consistency coefficient (K) decreases by 300 Pa⋅sn compared to the 30 wt.% content. With increasing temperature, n increases while K decreases. SEM observations reveal that samples with carbon fiber contents of 20 wt.% and 40 wt.% exhibit better fiber dispersion and orientation. However, the interfacial bonding strength is superior in the 40 wt.% sample. When the carbon fiber content reaches 50 wt.%, significant injection molding defects occur at the clamping end, leading to extensive matrix tearing during tension testing.

Enhanced mechanical and thermal properties of polyamide 6/p (N-(4-F-phenylmaleimide)–alt-styrene) composites based on interfacial complexation inducing crystal transformation

Enhanced thermal property and anti-moisture absorption of PA6/P (N-(4-carboxyphenyl)maleimide-alt-triallyl isocyanurate) composites based on solid-state interfacial reaction

Achieving anti‐moisture absorption and high thermal properties in bio‐based polyamide 56/F‐based heat‐resistant agent composites through crystal regulation

Interfacial Enhancement and Composite Manufacturing of Continuous Carbon-Fiber-Reinforced PA6T Composites via PrePA6T Ultrafine Powder

The study on microstructure and mechanical properties of multi-component composite based on HDPE

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Enhanced Thermal Conductivity in Polyamide 6 Composites Based on the Compatibilization Effect of Polyether-Grafted Graphene

Polyamide 6 Composite with Highly Improved Mechanical Properties by PEI-CNT Grafted Glass Fibers Through Interface Wetting, Infiltration and Crystallization

Significantly improving mechanical properties of CF/PAI composites: the influence of interfacial modification coupled with post heat treatment

Structure of polyamide 6/poly(ethylene terephthalate) blends under high cooling rate and shear stress and their moisture-sensitive properties

Synergistic Effect of Polyfunctional Silane Coupling Agent and Styrene Acrylonitrile Copolymer on the Water‐resistant and Mechanical Performances of Glass Fiber–reinforced Polyamide 6

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Investigation of the nanostructure and nanomechanical properties of the interphase in carbon fiber reinforced polyamide-6 composite

Improved interfacial shear strength in carbon fiber enhanced semi-aromatic polyamide 6T composite via in-situ polymerization on fiber surface

Construction of double grafted interfacial layer to improve thermal and mechanical properties of short carbon fiber reinforced polyamide 6 composites

Effects of Carbon Fiber Content on the Crystallization and Rheological Properties of Carbon Fiber-Reinforced Polyamide 6

Improvement of mechanical and wear resistance property by varying glass fiber contents and amino-silicate coupling agents on polyamide 612 composites

Coordination Between Yttrium Ions and Amide Groups of Polyamide 6 and the Crystalline Behavior of Polyamide 6/yttrium Composites

Structure and Perpormance of Polyamide 6 Composites Reinforced by Glass Fiber Compounded with Nano-Sio2 or Canbon Nanotubes

Melt Rheology and Mechanical Crystal Transformation in an Immiscible Blend with Poly(Vinylidene Fluoride) Matrix

Chemical-resistant polyamide 6/polyketone composites with gradient encapsulation structure: An insight into the formation mechanism