Abstract:Taking into account the local stresses resulting from the primary twinning with transformation strains, the competition between double twinning {10–11}–{10–12} and (10–12)–(–1012) (CDTW and EDTW) is theoretically modeled. Using electron backscatter diffraction technique, the statistical fractions, thickness-length ratios and their critical values of CDTW and EDTW within grains of as-cast AZ31 magnesium alloy sheets at the low strain stage of hot rolling processing are obtained to validate the theoretical results. In addition, the competition between the DTW and twin intersection are also discussed in detail. The results show that: (1) The secondary twin growth complies with the classical Hall-Petch relationship. Due to the difference in the driving forces resulting from different transformation strains between the primary extension and contraction twinning, the secondary extension twin of EDTW is more difficult to grow compared to that of CDTW for primary twin bands with small thickness-length ratios, which is contrary to the regulation for primary twin bands with large thickness-length ratios; (2) The greater the thickness-length ratio of the primary twinning is, the smaller the critical shear stress of the secondary twinning is. This is opposite to the effect of thickness-length ratio on the critical shear stress of the incident twinning in the twin intersection. It is indicated that the thickening of the primary twinning provides the higher driving force for the formation of DTW, however hinders the twin intersection more evidently; (3) Within coarse grains, at the low strain stage, the formation of DTW can dominantly induce dynamic recrystallization and continue plastic deformation, while the stress concentration resulting from the twin intersection is inclined to cause brittle fracture. Therefore, based on the effect of the local stress, the selection mechanism of the thickness-length ratio on the DTW and twin intersection is of great significance to determining the plastic performance of magnesium alloys during hot working. In the current study, massive control factors of the thickness-length ratio of the primary twinning are concluded, which provides some corresponding schemes of material design.

The Effect of Twin–twin Interaction in Mg 3al 1zn Alloy During Compression

A Study of {10-12} Twinning Activity Associated with Stress State in Mg-3Al-1Zn Alloy during Compression

Effect of twinning on the deformation behavior of an extruded Mg-Zn-Zr alloy during hot compression testing

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

Interaction between 10 1 ̄ 2 and 30 3 ̄ 4 twin in magnesium alloy

Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy

Identification and Analysis of Twinning Variants During Compression of a Mg–Al–Zn Alloy

EBSD Analysis and Theoretical Prediction of Twin Orientations During Compression in Mg-3Al-1Zn

The Effect of Twins on Mechanical Properties and Microstructural Evolution in AZ31 Magnesium Alloy during High Speed Impact Loading

Twin recrystallization mechanisms in a high strain rate compressed Mg-Zn alloy

Influence of Local Strain on Twinning Behavior During Compression of AZ31 Magnesium Alloy

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy

Effect of Local Stresses of Primary Twinning on Double Twinning, Twin Intersection and Their Competition

Effect of deformation conditions on twinning of AZ31 magnesium alloy during compression test

Extension Twin Variant Selection During Uniaxial Compression of A Magnesium Alloy

Twinning Behavior, Microstructure Evolution and Mechanical Property of Random-Orientated ZK60 Mg Alloy Compressed at Room Temperature

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels

On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced { 10 1 ̄ 2 } twins

Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review