Abstract:<math>{101¯2}</math> twins were introduced into the magnesium (Mg) plate AZ31 via pre-rolling along its transverse direction. The plates, both with and without the pre-induced <math>{101¯2}</math> twins, were subjected to uniaxial tension along different directions. Using crystal plasticity modeling, we found that the strengthening effect of the pre-induced <math>{101¯2}</math> twins on the macroscopic flow stress primarily arised from the increased slip resistance caused by the boundaries, rather than the orientation hardening due to the twinning reorientation (although the latter did make its contribution in some specific loading directions). Besides, the pre-existing <math>{101¯2}</math> twins were found, by both experiments and simulation, to promote the activity of prismatic 〈a〉 and pyramidal 〈c + a〉 in the parent matrix of the material. Further analysis showed that the enhanced non-basal slip activity is related to the <math>{101¯2}</math> twin boundaries' low micro Hall-Petch slope ratios of non-basal slips to basal slip. With the critical resolved shear stress (CRSS) obtained from crystal plasticity modeling and the orientation data from EBSD, a probability-based slip transfer model was proposed. The model predicts higher slip transfer probabilities and thus lower strain concentration tendencies at <math>{101¯2}</math> twin boundaries than that at grain boundaries, which agrees with the experimental observation that the strain localization was primarily associated with the latter. The present findings are helpful scientifically, in deepening our understanding of how the pre-induced <math>{101¯2}</math> twins affect the strength and slip activity of Mg alloys, and technologically, in guiding the design of the pre-strain protocol of Mg alloys.

Interaction between 10 1 ̄ 2 and 30 3 ̄ 4 twin in magnesium alloy

Interactions Between Dislocations and Penta-Twins in Metallic Nanocrystals

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

Size-Dependent Dislocation-Twin Interactions

Twin-solute, twin-dislocation and twin-twin interactions in magnesium

Characteristic boundaries associated with three-dimensional twins in hexagonal metals

Unravelling the Local Ring-Like Atomic Pattern of Twin Boundary in an Mg-Zn-Y Alloy

Towards understanding double extension twinning behaviors in magnesium alloy during uniaxial tension deformation

On the interaction of precipitates and tensile twins in magnesium alloys

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

{10 1 ̄ 2 } twinning nucleation in magnesium assisted by alternative sweeping of partial dislocations via an intermediate precursor

Subsequent growth and sequential twinning induced by the interaction of {332} twins in Ti 15Mo alloy

Effects of {10-12} Twin Boundary on Nanotribological Behavior of Pure Mg: A Molecular Dynamics Simulation

Structural characterization of {10 2} twin tip in deformed magnesium alloy

Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review

Disconnection-mediated twin embryo growth in Mg

The Effect of Twins on Mechanical Properties and Microstructural Evolution in AZ31 Magnesium Alloy during High Speed Impact Loading

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

Asymmetric Growth Of Tensile Twins In Magnesium

On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced { 10 1 ̄ 2 } twins