Abstract:<math>{101¯2}</math> twins were introduced into the magnesium (Mg) plate AZ31 via pre-rolling along its transverse direction. The plates, both with and without the pre-induced <math>{101¯2}</math> twins, were subjected to uniaxial tension along different directions. Using crystal plasticity modeling, we found that the strengthening effect of the pre-induced <math>{101¯2}</math> twins on the macroscopic flow stress primarily arised from the increased slip resistance caused by the boundaries, rather than the orientation hardening due to the twinning reorientation (although the latter did make its contribution in some specific loading directions). Besides, the pre-existing <math>{101¯2}</math> twins were found, by both experiments and simulation, to promote the activity of prismatic 〈a〉 and pyramidal 〈c + a〉 in the parent matrix of the material. Further analysis showed that the enhanced non-basal slip activity is related to the <math>{101¯2}</math> twin boundaries' low micro Hall-Petch slope ratios of non-basal slips to basal slip. With the critical resolved shear stress (CRSS) obtained from crystal plasticity modeling and the orientation data from EBSD, a probability-based slip transfer model was proposed. The model predicts higher slip transfer probabilities and thus lower strain concentration tendencies at <math>{101¯2}</math> twin boundaries than that at grain boundaries, which agrees with the experimental observation that the strain localization was primarily associated with the latter. The present findings are helpful scientifically, in deepening our understanding of how the pre-induced <math>{101¯2}</math> twins affect the strength and slip activity of Mg alloys, and technologically, in guiding the design of the pre-strain protocol of Mg alloys.

Effects of {10-12} Twin Boundary on Nanotribological Behavior of Pure Mg: A Molecular Dynamics Simulation

Interactions Between Dislocations and Penta-Twins in Metallic Nanocrystals

Size-Dependent Dislocation-Twin Interactions

Twin-size Effects on the Hardness and Plastic Deformation Mechanisms of Nanotwinned Diamond

Effect of Twin Boundary Density on Mechanical Behavior of Al0.1CoCrFeNi High-Entropy Alloy by Molecular Dynamics Simulation

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

Study on the Twinning/De-twining Behavior of Different Types of Twin–Twin Interaction via Experiments and Molecular Dynamics Simulation

Quantifying the effect of twin boundaries on grain boundary activities in nanotwinned copper: A molecular dynamics simulation

Interaction between 10 1 ̄ 2 and 30 3 ̄ 4 twin in magnesium alloy

Unravelling the Local Ring-Like Atomic Pattern of Twin Boundary in an Mg-Zn-Y Alloy

Plastic deformation response during crack propagation in Mg bicrystals with twin boundaries

Finite strain crystal plasticity-phase field modeling of twin, dislocation, and grain boundary interaction in hexagonal materials

Atomic simulations of the effect of Y and Al segregation on the boundary characteristics of a double twin in Mg

On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced { 10 1 ̄ 2 } twins

Blocking Effect of Twin Boundaries on Partial Dislocation Emission from Void Surfaces

{ 10 1 ̄ 2 } twin–twin intersection-induced lattice rotation and dynamic recrystallization in Mg–6Al–3Sn–2Zn alloy

The Effect of Tension Twin on the Dynamic Recrystallization Behavior in Polycrystal Magnesium by Atomistic Simulation

Molecular Dynamics Simulation of the Interaction Between Nanoscale Twin Boundaries and Partial Dislocations

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review

Disconnection-mediated twin embryo growth in Mg