Abstract:This study was deeply focused on developing a novel CTS/GO/ZnO composite as an efficient adsorbent for CO 2 adsorption process. To do so, design of experiment (DOE) was done based on RSM-BBD technique and according to the DOE runs, various CTS/GO/ZnO samples were synthesized with different GO loading (in the range of 0 wt% to 20 wt%) and different ZnO nanoparticle's loading (in the range of 0 wt% to 20 wt%). A volumetric adsorption setup was used to investigate the effect of temperature (in the range of 25–65 °C) and pressure (in the range of 1–9 bar) on the obtained samples CO 2 uptake capability. A quadratic model was developed based on the RSM-BBD method to predict the CO 2 adsorption capacity of the composite sample within design space. In addition, CO 2 adsorption process optimization was conducted and the optimum values of the GO, ZnO, temperature, and pressure were obtained around 23.8 wt%, 18.2 wt%, 30.1 °C, and 8.6 bar, respectively, with the highest CO 2 uptake capacity of 470.43 mg/g. Moreover, isotherm and kinetic modeling of the CO 2 uptake process were conducted and the Freundlich model (R 2 = 0.99) and fractional order model (R 2 = 0.99) were obtained as the most appropriate isotherm and kinetic models, respectively. Also, thermodynamic analysis of the adsorption was done and the ∆H°, ∆S°, and ∆G° values were obtained around − 19.121 kJ/mol, − 0.032 kJ/mol K, and − 9.608 kJ/mol, respectively, indicating exothermic, spontaneously, and physically adsorption of the CO 2 molecules on the CTS/GO/ZnO composite's surface. Finally, a renewability study was conducted and a minor loss in the CO 2 adsorption efficiency of about 4.35% was obtained after ten cycles, demonstrating the resulting adsorbent has good performance and robustness for industrial CO 2 capture purposes.

Highly Porous Core–Shell Structured Graphene-Chitosan Beads

Tailoring the Adsorption Rate of Porous Chitosan and Chitosan–carbon Nanotube Core–shell Beads

Preparation and characterization of 3D graphene oxide nanostructures embedded with nanocomplexes of chitosan- gum Arabic biopolymers

Self-assembled graphene oxide microcapsules with adjustable permeability and yolk-shell superstructures derived from atomized droplets.

Carbon Nanotube–Chitosan Composite Beads with Radially Aligned Channels and Nanotube‐Exposed Walls for Bilirubin Adsorption

Porous graphene oxide functionalized by covalent organic framework for the application in adsorption and electrochemical: The effect of C-F bonds to structure

Porous and hydrophobic graphene-based core–shell sponges for efficient removal of water contaminants

Efficient CO2 adsorption using chitosan, graphene oxide, and zinc oxide composite

Preparation of ultra-light, highly compressible, and biodegradable chitosan porous materials for heavy metal adsorption, dye adsorption and oil-water separation

Polymer-Coated Graphene Aerogel Beads and Supercapacitor Application.

Facile Large-Scale Synthesis of Macroscopic 3D Porous Graphene-Like Carbon Nanosheets Architecture for Efficient CO2 Adsorption

Tailoring the Adsorption and Antibacterial Bifunctions of Newly Constructed Porous Alginate–Chitosan–Graphene Oxide Nanosheets Gel Beads

Highly efficient adsorption of anionic dyes on a porous graphene oxide nanosheets/chitosan composite aerogel

Chitosan-Functionalized-Graphene Oxide (GO@CS) Beads as an Effective Adsorbent to Remove Cationic Dye from Wastewater

Graphene Oxide–Chitosan Composite Material for Treatment of a Model Dye Effluent

Graphene Oxide/Chitosan Composite for Methylene Blue Adsorption

Engineering Porosity-Tuned Chitosan Beads: Balancing Porosity, Kinetics, and Mechanical Integrity

Synthesis and Characterization of Graphene Oxide/Chitosan Composite Aerogels with High Mechanical Performance

Porous Graphene Oxide-Based Carbon Artefact with High Capacity for Methylene Blue Adsorption

Graphene oxide/polydopamine modified montmorillonite/carboxymethyl chitosan composite aerogel for efficient removal of Pb 2+ , Cu 2+ , and Cd 2+ : Adsorption behavior, mechanism and DFT study

Facile preparation of reduced GO modified porous ceramics with hierarchical pore structure as a highly efficient and durable sorbent material