Abstract:Zhundong coal represents a large portion of China's future energy supply, because of the large reserve capacity. Although Zhungdong coal has low ash and good ignition characteristics, it also contains large amounts of sodium, which can foul and corrode heat-transfer surfaces. For economically viable use of Zhundong coal or other high-alkali coals, the alkali release must be mitigated prior to or within the burner. This can be done either by washing the coal,, using sorbents to trap the sodium, or a combination of these methods. Additive influence on the release of sodium over the entire coal combustion process was measured using a calibrated laser-induced breakdown spectroscopy (LIBS) technique. The additives used were alumina, silica, and five mineral sorbents comprising blends of silica, alumina, and various other inorganic compounds; different coal/sorbent ratios were assessed (1%, 3%, and 5% additive, by weight). During the three stages of sample coal combustion, it was found that the first stage, devolatilization, releases only similar to 1.2% of the total sodium; the char combustion stage releases similar to 28% of the total sodium; and the ash stage releases the vast majority of sodium (similar to 70%). The peak instantaneous release rate occurs during the char combustion stage. The sodium retention efficiency for all of the sorbents tested was lowest during the devolatilization stage and there was no appreciable change to the duration of the stage. Sodium retention efficiency was greatest in the ash stage, primarily due to the sheer amount of sodium released during this stage. The ash stage was effectively shortened, in proportion to the retention efficiency of the sorbent. The sodium release during the char combustion stage showed an obvious difference in profile for the various types of sorbent tested. Alumina was the least effective in reducing sodium release and retained the characteristic shape of sodium release from raw coal during this stage. Silica and sepiolite demonstrated similar sodium release profiles, which were markedly different than the sodium release profiles of either alumina or aluminosilicate mineral samples. Time-resolved sodium retention plots show an enhancement in the sodium retention by alumina during the char burnout. The addition of sodium sorbent to the coal extended the duration of the char burnout stage, which may indicate that the reduction of available sodium reduces the alkali catalysis of the char decomposition.

Cascade Chain Catalysis of Coal Combustion by Na–Fe–Ca Composite Promoters from Industrial Wastes

The Catalytic Effect of the Na and Ca-rich Industrial Wastes on the Thermal Ignition of Coal Combustion

Effects of Na and Fe on the Formation of Coal-Derived Soot in a Two-Stage Flat-Flame Burner

Effect of Na/Ca/Fe on Slagging Behavior of Zhundong Coal During Combustion Process

Effect of Chlorine, Sulfur, Moisture and Ash Content on the Partitioning of As, Cr, Cu, Mn, Ni and Pb During Bituminous Coal and Pickling Sludge Co-Combustion

Effects of Minerals Containing Sodium, Calcium, and Iron on Oxy-Fuel Combustion Reactivity and Kinetics of Zhundong Coal Via Synthetic Coal

Catalytic Effects of Main Metals in Coal Ash on Advanced Reburning of Pulverized Coal

Co-combustion of carbon-rich fraction from coal gasification fine slag and biochar: Gas emission, ash sintering, heavy metals evolutions and environmental risk evaluation

Experimental Study on Fouling and Slagging Behaviors During Oxy-Fuel Combustion of High-Sodium Coal Using a High-Temperature Drop-Tube Furnace

Insight into coal catalytic gasification mechanism of Na or Ca using experiments combined with DFT calculations with carbon black as a novel coal model

Synergistic Co-Combustion of Carbon-Rich Fraction from Coal Gasification Fine Slag and Corncob Char: Performance, Mechanism, Kinetics, and Thermodynamics

Catalytic Effects of Alkali Carbonates on Coal Char Gasification

Mechanisms Of Inorganic Element Transfer During Zhundong Coal Combustion In Drop Tube Furnace

Investigation of the Characteristics of Catalysis Synergy During Co-Combustion for Coal Gasification Fine Slag with Bituminous Coal and Bamboo Residue

High Iron and Calcium Coal Ash As the Oxygen Carrier for Chemical Looping Combustion

Use of Fe2O3-Containing Industrial Wastes As the Oxygen Carrier for Chemical-Looping Combustion of Coal: Effects of Pressure and Cycles

Inhibition of Sodium Release from Zhundong Coal Via the Addition of Mineral Additives: Online Combustion Measurement with Laser Induced Breakdown Spectroscopy (Libs)

Effects of alkali and alkaline earth metal species on the combustion characteristics and synergistic effects: Sewage sludge and its blend with coal

Co-combustion of Bituminous Coal and Pickling Sludge in a Drop-Tube Furnace: Thermodynamic Study and Experimental Data on the Distribution of Cr, Ni, Mn, As, Cu, Sb, Pb, Cd, Zn, and Sn

Effects of Silicon-Aluminum Additives on Ash Mineralogy, Morphology, and Transformation of Sodium, Calcium, and Iron During Oxy-Fuel Combustion of Zhundong High-Alkali Coal

Assessment on combustion performance and bottom ash properties of carbon‐rich fraction from coal gasification fine slag co‐combustion with corn straw char