Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Effects of alkali and alkaline earth metal species on the combustion characteristics and synergistic effects: Sewage sludge and its blend with coal

Effects of alkali and alkaline earth metals on co-combustion of sewage sludge and coal slime: Combustion characteristics, interactions, and kinetics

Mechanism of Na2O/CaO Ratio Affecting Ash Fusing Characteristics During Ash Deposition and Slagging in Municipal Solid Waste Incinerator

The effect of alkali and alkaline earth metals (AAEMs) on combustion and PM formation during oxy-fuel combustion of coal rich in AAEMs

Heavy metals behavior of co-combustion ash from sewage sludge and coal slime: Temperature and mixing ratio dependence, interactions and speciation

Co-combustion of sewage sludge and Zhundong coal: Effects of combustion conditions on gaseous pollutant emission and ash properties

Evaluation of the Thermal Behavior, Synergistic Catalysis, and Pollutant Emissions During the Co-Combustion of Sewage Sludge and Coal Gasification Fine Slag Residual Carbon

The Thermal Behavior and Kinetics of Co-Combustion Between Sewage Sludge and Wheat Straw

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Effect of the Coal Fly Ash Blending Ratio on Biomass Slagging Structure Modification and Alkali Metal Migration

Understanding Ash Sintering Variation Behaviors of Low-Rank Coals with Municipal Sludge Addition Based on Mineral Interactions

Combustion Effects and Emission Characteristics of SO2, CO, NOx and Heavy Metals During Co-Combustion of Coal and Dewatered Sludge

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Sludge Acts As a Catalyst for Coal During the Co-Combustion Process Investigated by Thermogravimetric Analysis

High-Temperature Ash Melting and Fluidity Behavior upon the Cocombustion of Sewage Sludge and Coal

The Catalytic Effect of the Na and Ca-rich Industrial Wastes on the Thermal Ignition of Coal Combustion

Effecting mechanisms of iron-rich sludge on ash fusion characteristics of coal with high ash fusion temperature under reducing atmosphere

Ash Formation and Associated Interactions during Co-Combustion of Wheat Straw and Sewage Sludge

Enhancement of ash properties on alkali and alkaline earth metal retention by coal additives in the gasification condition

Effects of sludge on the ash fusion behaviors of corn stalk and its modification mechanisms

Effects of S and Al on K Migration and Transformation during Coal and Biomass Co-combustion