Abstract:Journal of Composite Materials, Ahead of Print. In this study, a three-dimensional random representative volume element model was constructed using the finite element method combined with Python script to investigate the residual stress distribution in SiCp/Al composites with varying volume fractions, particle shapes, and particle size under thermal cycling conditions. The model has two different particle morphologies: spheres and irregular polygons. The results show that the irregular polygonal SiC particles exhibit higher residual stresses than spherical particles before and after thermal cycling due to their complex load transfer pathways and higher stress concentration at particle corners, which makes them more consistent with the characterization of SiCp/Al composites under practical application conditions. As the volume fraction of SiC particles increases, the particle spacing decreases, hindering the release of thermal stresses through plastic deformation. Notably, the relief rate of residual stress reached 53% in the 12 vol% SiCp/Al composites, with the stress decreasing from 698 MPa to 328 MPa after 50 thermal cycles. In contrast, the reduction rate for 18 vol% composites is only 13% after thermal cycling. Furthermore, compared to larger particles (7.3 μm, 8.9 μm), the smaller particles (4.3 μm, 5.9 μm) exhibit a more uniform stress distribution and lower thermal stresses before and after thermal cycling. Consequently, our work provides a significant theoretical basis for the design and application of SiCp/Al composites, especially for the application of materials under extreme temperature changes.

Finite Element Analysis of the Effect of Particle Shape on the Thermal Residual Stress in Al Matrix Composites

Thermal Stress Analysis of SiCP/2024Al Composites under Different Heat Treatments

Finite Element Method Simulation for Residual Stress in Quenched Aluminum Alloy Thick-Plate and Its Effect on Machining Distortion

Analyses of thermal and residual microstresses between the particles and matrix of composites

Finite Element Analysis on Thermal Residual Stress of Particle-reinforced Iron-matrix Composite

Effects of Particle Size on Residual Stresses of Metal Matrix Composites

Finite Element Analysis of Thermal Residual Stress in Unidirectional Fiber Reinforced Composite

Numerical Analysis and Experimental Studies on the Residual Stress of W/2024Al Composites

Numerical Analysis of the Effects of Reinforcing Particles on the Residual Stress of TiB2/Al-Si Composites Fabricated by Laser Powder Bed Fusion

Investigating the Effects and Mechanisms of Thermal–Vibration-Coupled Stress Relief Treatment on Residual Stress in SiC/Al Composites

Finite Element Analysis for the Influence of Nanoparticles on the Thermal Resudual Stressinfiber Reinforced Composite

Thermal Residual Stresses in SiC Particle Reinforced Aluminium Composites: a Study by the Taylor-based Nonlocal Theory of Plasticity

Study of the residual stress distribution in SiCp/Al composites under thermal cycling conditions

Analysis Of The Thermo-Residual Stress In Production On Fiber Reinforced Aluminum Matrix Composites

Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction

Effect of Different Dimensional Stability Treatments on Microstructure and Mechanical Properties of SiC_p/2024Al Composite

Thermal Residual Strain in Silicon Carbide Whisker Reinforced Aluminium-Matrix Composite

Thermal Residual Stresses and Stress Distributions under Tensile and Compressive Loadings of Short Fiber Reinforced Metal Matrix Composites

Effect of thermal residual stress on the tensile properties and damage process of C/SiC composites at high temperatures

STUDY ON THE RELATIONSHIP BETWEEN THERMAL EXPANSION BEHAVIOR AND INTERNAL STRESSES OF AN SiC WHISKER REINFORCED COMPOSITE

Numerical Simulation of Residual Stress in Quenching 2024 Honeycomb Aluminum Alloy Thin Plates