Abstract:Magnetic fluid, a new type of magnetic material, is a colloidal liquid constituted of nano-scale ferromagnetic particles suspended in carrier fluid. Magnetic fluid sealing is one of the most successful applications of magnetic fluid. As a new type of seal offering the advantages of no leakage, long life and high reliability, the magnetic fluid seal has been widely utilized under vacuum-and low-pressure-differential conditions. In practical applications, for improved pressure capacity, a multistage sealing structure is always used. However, in engineering applications, a uniform distribution of magnetic fluid under each tooth often cannot be achieved, which problem weakens the overall pressure capacity of the seals. In order to improve the pressure capacity of magnetic fluid seals and broaden their applications, the present study theoretically and experimentally analyzed the degree of non-uniform distribution of multistage magnetic fluid seals. A mathematical model reflecting the relationship between the pressure capacity and the distribution of magnetic fluid under a single tooth was constructed, and a formula showing the relationship between the volume of magnetic fluid and its contact width with the shaft was derived. Furthermore, the relationship of magnetic fluid volume to capacity was analyzed. Thereby, the causes of non-uniform distribution could be verified: injection of magnetic fluid; the assembly of magnetic fluid seals; the change of magnetic fluid silhouette under pressure loading; the magnetic fluid sealing mechanism of pressure transmission, and seal failure. In consideration of these causes, methods to improve the pressure capacity of magnetic fluid seals was devised (and is herein proposed).

Experimental Study on Self-restoring of Magnetic Fluid Seal with Water as a Sealing Medium

Experimental visualization of the lifetime and self-healing of magnetic fluid seals

Comparative study of the sealing mechanism and performance between magnetic fluid and magnetorheological fluid seals

Analytical and Experimental Study of Sealing Behavior at Water and Magnetic Fluid Interface

Analysis and Experimental Study on Magnetic Fluid Seal Mechanism

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Study on the technology of combined seal of magnetic fluid seal and mechanical seal

The Pressure Loading Process among Stages of Magnetic Fluid Seal in Aqueous Environment

Study on the magnetic fluid sealing of dry roots pump

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal

A comparative study of magnetic seals by ferrofluids, magnetorheological fluids and magnetic powders

Numerical Analysis and Experimental Study on Magnetic Fluid Reciprocating Seals

Study on the magnetic fluid sealing for dry Roots pump

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

Non-Uniform Distribution of Magnetic Fluid in Multistage Magnetic Fluid Seals

Numerical and experimental study of the ultimate pressure and self-repairing capability of diverging magnetic fluid seal with stepped pole pieces

Numerical and Experimental Study of Magnetic Fluid Seal with Large Sealing Gap and Multiple Magnetic Sources

Experimental Study of Static Sealing Structure with Large Diamter and Sealing Gap Using Magnetic Fluid

Study on the Effect of Magnetorheological Fluids (mrfs) on the Sealing Performance

Experimental investigation on the critical pressure and self-repairing capability of converging magnetic fluid seal with stepped pole pieces

Design and Performance Study of Magnetic Field Generator of Magnetic Liquid Hydrodynamic Seal