Abstract:Purpose Magnetic fluid has excellent function used as lubricants in bearings and mechanical seals, and the purpose of this study is to investigate the sealing performance in a spiral groove mechanical seal lubricated by magnetic fluid. Design/methodology/approach The sealing characteristic parameters of the lubricating film between the end faces of two sealing rings were calculated based on the Muijderman narrow groove theory for a spiral groove mechanical seal lubricated by magnetic fluid. The film thickness was determined according to the balanced forces on the rotating ring, and the effects of operating conditions, intensity of the magnetic field and diameter of nanoparticles on the sealing characteristics were investigated. Findings It has been found that the intensity of magnetic field has a great effect on the viscosity of magnetic fluid, film thickness and friction torque while has a little effect on the mass flux of magnetic fluid. The film thickness, mass flux of magnetic fluid and friction torque increase with the increasing volume fraction, rotating speed and diameter of magnetic nanoparticles in magnetic fluid. The mass flux of magnetic fluid decrease with the increasing closing force, and the friction torque decreases with the increase of media pressure. Originality/value The change of intensity of magnetic field can affect the viscosity of magnetic fluid and then changes the sealing performance in a mechanical seal lubricated by magnetic fluid. To reduce the mass flux of magnetic fluid and friction torque, the volume fraction, diameter of solid magnetic particles and film thickness should be 5%–7%, 8–10 nm and 2–9.3 μm, respectively. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2023-0032/

Study on the Effect of Magnetorheological Fluids (mrfs) on the Sealing Performance

A Comparative Study of Ferrofluid Seal and Magnetorheological Fluid Seal

Comparative study of the sealing mechanism and performance between magnetic fluid and magnetorheological fluid seals

A comparative study of magnetic seals by ferrofluids, magnetorheological fluids and magnetic powders

Research on the wear characteristics of magnetorheological fluid in sealing interface considering the interaction between surface roughness and magnetic particles

Numerical Simulation and Experimental Study on Magnetorheological Fluid Seals with Flexible Pole Pieces

Experimental study of surface roughness on improving the tribological performance of sealing pairs in magnetorheological damper

Theoretical Analysis and Experimental Study on the Influence of Magnet Structure on Sealing Capacity of Magnetic Fluid Seal

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Experimental study of the magnetic fluid reciprocating seal in vacuum environment

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

Experimental study of sealing mechanism and sealing performance of symmetric magnetic fluid seal with occlusal pole teeth

Experimental Study for Magnetic Fluid Seal

Studies of Magnetic Fluid Plane Sealing in Split Sealing Device

Numerical and Experimental Study of Magnetic Fluid Seal with Large Sealing Gap and Multiple Magnetic Sources

Study on performance optimization of double screw-magnetic fluid combination seal

Numerical Analysis and Experimental Study on Magnetic Fluid Reciprocating Seals

Modification of Magnetorheological Fluid and Its Compatibility with Metal Skeleton: Insights from Multi-Body Dissipative Particle Dynamics Simulations and Experimental Study

Research on Magnetic Leakage in the Structure of Magnetic Fluid Sealing

Sealing performance in a spiral groove mechanical seal lubricated by magnetic fluid

Numerical and experimental study of convergent integral embedded magnetic fluid seal