Abstract:A micro opto-mechanical displacement sensor is here presented. It is constituted by a sensing element based on two overlapped micro-diffraction gratings (MDGs). They present a platinum layer (45 nm of thick) on a glass substrate, a period of 525 µm constituted by a width of 150 µm of platinum separated (71.4% duty cycle). The working principle is based on the modulation of light intensity induced by the relative displacement between the MDGs: when a laser light perpendicularly hits the MDGs, the intensity of the transmitted light is a periodic function of the relative displacement between the two MDGs. A fiber optic is used to transport the transmitted light to a photodetector in order to avoid concerns related to the alignment between the optical components. The sensor's output is the ratio between the light intensity measured by the photodetector during the displacement of the MDGs and largest light intensity values measured in the whole range of measurement, therefore, it is lower than 1. The proposed sensor allows to discriminate displacement lower than 10 µm, using a cost effective micro-fabrication process implemented by the technique of Lift-Off. It shows a good linear behaviour in two ranges covering about one half of the MDGs period. Within the linear ranges it shows high sensitivity (about 0.5%/µm) and good accuracy (lower than 4% in the whole range of calibration); furthermore, the results show that a design with a duty cycle of 50% overcomes the marked decrease of sensitivity in a range of measurement corresponding to a grating period.

Optic Fiber Grating Sensor Based Modified Dual-Grating Matrix Operation

Multi-parameter and Multi-functional Fiber Grating Sensing Technology

Ameliorated Spatial Division Multiplexing System of FBG Sensors Based on Novel Wavelength Detection and Demodulation Technique

Study of Fiber Grating Displacement Sensor

Fiber Grating Sensor Using Dynamic PZT Modulation

Large-scale range diffraction grating displacement sensor based on polarization phase-shifting

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

All-Fiber Strain Sensor Based on Dual Side V-Grooved Long-Period Fiber Grating

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

Research on sensitive characteristics of tilted fiber grating sensors

Study on the Method of Matching Detection of Fiber Grating Vibration Sensor

Multiplexing Scheme of Long-Period Grating Sensors Based on a Modified Optical Frequency Domain Reflectometry

Self-compensating Fiber Optic Flow Sensor Based on Dual Fiber Bragg Gratings

An Optical Fiber Lateral Displacement Measurement Method and Experiments Based on Reflective Grating Panel.

THE STUDY ON FIBRE GRATING VIBRATION SENSOR

A Low Cross-Axis Sensitivity Micro-Grating Accelerometer With Double-Layer Cantilever Beams

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

A micro opto-mechanical displacement sensor based on micro-diffraction gratings: design and characterization

A Long-Period Fiber Grating Sensor Based on a Core-Cladding Misalignment Structure

Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System

A Grating Microcantilever Biosensor Based on Diffraction Spectrum Feedback Balanced